amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Halloween Spider Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 67 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
11.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet spider pattern for a round black amigurumi spider with eight striped legs, big felt-backed eyes and a tiny purple witch hat. The legs have purple stripes and orange tips and bend at the knee, and this spider plushie smiles with two little white fangs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and stands about 12 cm (4.5 in) tall with the hat; the legs are lightly stuffed tubes and the brim starts from a chain ring. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where each leg goes.

Halloween Spider häkeln

Mittel · 12 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 13 Teile in Runden: Body, Leg ×8, Witch hat, Hat brim, Cheek ×2 (insgesamt 67 Runden).
  2. Fülle und montiere in 8 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 51 Runden fertig

  1. Size before assembly: about 8.5 cm at the widest, 7.3 cm long; 29 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 6 cm long; 17 rounds.
  2. Change to spider (pull it through on the last yarn-over of R3).
  3. Change to purple (pull it through on the last yarn-over of R5).
  4. Change to spider (pull it through on the last yarn-over of R7).
  5. Change to purple (pull it through on the last yarn-over of R9).
  6. Change to spider (pull it through on the last yarn-over of R11).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8.5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 8, 2 st from the centre front line, downward <!-- st 2.07 down -->). On the inner side draw rounds 7 and 10 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 5.1 cm long; 15 rounds.
  2. Change to band (pull it through on the last yarn-over of R11).
  3. Change to hat (pull it through on the last yarn-over of R13).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 45° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 2.5 st from the centre front line, toward the toy's right <!-- st 2.27 right -->). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 5.9 cm at the widest, 1.1 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.9 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (felt), 2 ovals 20×21 mm (on the body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 15, 4 st from the centre front line, toward the toy's left.
  • Safety eyes with a printed glint 14 mm (on the body): between rounds 15 and 16, 8 st apart (count along round 15: about 4 st each side of the centre front line).
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, 1.5 st from the centre front line, toward the toy's right ) → (in round 19, 1 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line ) → (in round 19, 1 st from the centre front line, toward the toy's left ) → (in round 18, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done