amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Fantasie

Ghost in a Mouse Costume Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 84 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorFantasie

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
15.4 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A crochet amigurumi inspired by Mimikyu from Pokémon: a little ghost hiding under a yellow cloth costume with a drawn-on face and a bent ear. About 15 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Pokémon.

Ghost in a Mouse Costume häkeln

Mittel · 15 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 7 Teile in Runden: Body in costume, Ragged hem, Ear, Bent ear, Claw ×2, Stick tail (insgesamt 87 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixHäkeln

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 64 Runden fertig

  1. Size before assembly: about 8.1 cm at the widest, 10.9 cm long; 38 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 9.1 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  2. Change to cloth (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  2. Change to cloth (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) --> Bend ≈ 110° around round 7<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 7, 2.5 st from the centre front line, toward the toy's left <!-- st 2.71 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. Size before assembly: about 0.8 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.7 cm at the widest, 3.9 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 6<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 0.5 st from the centre top line, toward the toy's left <!-- st 0.37 left -->). On the inner side draw rounds 6 and 7 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's left ) → (in round 26, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's right ) → (in round 26, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 24 and 25, 1 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, on the centre front line ) → (between rounds 24 and 25, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's left ).
  • Felt (cheek), 2 ovals 9×9 mm (on the body in costume) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 25, 6 st from the centre front line, toward the toy's left.

Body in costume · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done