amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Fantasy

Ghost in a Mouse Costume crochet pattern

  • Mathematically BalancedChecked by script: in all 84 rounds the increases and decreases add up to the stitch count.

by the pattern engineFantasy

Difficulty
2/3
Time
~3 h
Size
15.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A crochet amigurumi inspired by Mimikyu from Pokémon: a little ghost hiding under a yellow cloth costume with a drawn-on face and a bent ear. About 15 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Pokémon.

How to crochet the Ghost in a Mouse Costume

Intermediate · 15 cm tall · about 3 h · DK yarn · 2.5 mm hook

  1. Crochet the 7 pieces in rounds: Body in costume, Ragged hem, Ear, Bent ear, Claw ×2, Stick tail (87 rounds in all).
  2. Stuff and put it together in 6 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 8 gathered

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixCrochet it

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 64 rounds done

  35. Size before assembly: about 8.1 cm at the widest, 10.9 cm long; 38 rounds.
  36. → Start stuffing (firmly) and keep adding as you decrease.
  37. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  4. Size before assembly: about 9.1 cm at the widest, 0.8 cm long; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  12. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  13. Change to cloth (pull it through on the last yarn-over of R4).
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  12. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  13. Change to cloth (pull it through on the last yarn-over of R4).
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) --> Bend ≈ 110° around round 7<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 7, 2.5 st from the centre front line, toward the toy's left <!-- st 2.71 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  4. Size before assembly: about 0.8 cm at the widest, 1.6 cm long; 5 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. Size before assembly: about 0.7 cm at the widest, 3.9 cm long; 11 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 6<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 0.5 st from the centre top line, toward the toy's left <!-- st 0.37 left -->). On the inner side draw rounds 6 and 7 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's left ) → (in round 26, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's right ) → (in round 26, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 24 and 25, 1 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, on the centre front line ) → (between rounds 24 and 25, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's left ).
  • Felt (cheek), 2 ovals 9×9 mm (on the body in costume) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 25, 6 st from the centre front line, toward the toy's left.

Body in costume · R1–R5

MR××××××VVVVVV×V×V×

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done