amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Frog in an Elf Hat Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 52 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
7.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet frog pattern for a round green ornament in a striped elf hat, ready to hang on the Christmas tree. This amigurumi frog has big eye bumps, pink cheeks, a cream tummy and a red-and-green hat topped with a little gold bell and a closed gold loop. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 7.8 cm (3 in) tall; the body is one stuffed ball, and the eye bumps, tummy, paws and hat are sewn on, with safety eyes with a glint (embroider them for small children). Follow it row by row with stitch counts and turn the interactive 3D model to check every piece.

Frog in an Elf Hat Ornament häkeln

Für Anfänger · 8 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 11 Teile in Runden: Head-body ball, Cream belly, Eye bump ×2, Cheek ×2, Paw ×2, Elf hat, Bell, Hanging loop (insgesamt 52 Runden).
  2. Fülle und montiere in 8 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 12 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 45 Runden fertig

  1. Size before assembly: about 4.3 cm at the widest, 3.6 cm long; 19 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 2.8 × 2.2 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.2 cm at the widest, 1.5 cm long; 6 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 3 cm at the widest, 2.5 cm long; 11 rounds.
  2. Change to santa red (pull it through on the last yarn-over of R2).
  3. Change to elf green (pull it through on the last yarn-over of R4).
  4. Change to santa red (pull it through on the last yarn-over of R6).
  5. Change to elf green (pull it through on the last yarn-over of R8).
  6. Change to santa red (pull it through on the last yarn-over of R10).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 40° around round 6<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 6, on the centre back line). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 1.3 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 7 mm (on the eye bump) (2: one on each eye bump; the left one is described, the right is its mirror): in round 3, on the centre front line .
  • Embroidery in dark green thread (on the head-body ball), straight stitches through: (between rounds 12 and 13, 3 st from the centre front line, toward the toy's right ) → (in round 11, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's left ) → (in round 11, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 3 st from the centre front line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done