amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Polar Bear in a Gift Box Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 74 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~2 Std.
Größe
7.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet christmas present pattern: a tiny amigurumi polar bear cub peeking out of an open green gift box. The little bear wears a red ribbon bow between its ears, rests its paws on a red lid band and has a gold ring on top for hanging. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 7.7 cm (3 in) tall, with safety eyes and nose (or embroider them) and the ears, bow, paws and ribbon sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece; it also makes a cute gift topper.

Polar Bear in a Gift Box Ornament häkeln

Mittel · 8 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 15 Teile in Runden: Gift box, Lid band, Bear body, Head, Bow knot, Bow loop ×2, Hanging loop, Ear ×2, Muzzle, Cheek ×2, Paw ×2 (insgesamt 74 Runden).
  2. Fülle und montiere in 12 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 56 Runden fertig

  1. Size before assembly: an oval about 5.3 × 3.5 cm at the widest, 3 cm long; 16 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 3 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With forest green: ch 8.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.3 cm at the widest, 1.1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.5 cm at the widest, 2.2 cm long; 11 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.2 cm at the widest, 2.9 cm long; 17 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.9 cm at the widest, 1.1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.5 cm long; 6 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. Size before assembly: about 1.9 cm at the widest, 1 cm long; 4 rounds.
  2. Change to snow (pull it through on the last yarn-over of R1).
  3. → This piece is not stuffed.
  4. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 1.6 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 19 mm across.<!-- (dish 50 %) -->

  1. Size before assembly: an oval about 1.6 × 1 cm at the widest, 0.9 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With snow: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.2 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 1.1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 5–6 mm (on the head): in round 10, 7 st apart (count along round 10: about 3.3 st each side of the centre front line).
  • Safety nose, triangle, 6×4.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour charcoal #2b2a2a.
  • Embroidery in charcoal thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in charcoal thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2 st from the centre bottom line, toward the toy's left ).

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung