amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Fantasie

Baby Phoenix with Flame Crest Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 83 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorFantasie

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
9.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet phoenix pattern: a Baby Phoenix with Flame Crest amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A round red chick with a golden belly, a fan of flame feathers on its head and tail, flame-tipped wings, a determined little frown and a sooty grey bottom, as if it has just risen from the ashes. You need about 75 m of yarn: 30 m red, 20 m orange, 10 m yellow, 5 m charcoal, 5 m grey and 5 m coral. Plan on roughly 2 hours. It makes a fun desk buddy or a gift for fantasy and bird lovers, and it is a good project if you like playing with colour changes. You can spin the 3D model and follow the round-by-round pattern.

Baby Phoenix with Flame Crest häkeln

Mittel · 10 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Ball body with head, Centre flame tuft, Flame tuft ×2, Beak, Wing ×2, Tail feather ×3, Foot ×2, Cheek ×2 (insgesamt 83 Runden).
  2. Fülle und montiere in 11 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Küken →Alles in fantasie →
  • Vorschau von Green Dino with a Red Saddle
    Generator
    HäkelnRemix

    Green Dino with a Red Saddle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 62 Runden fertig

  1. Size before assembly: about 8.1 cm at the widest, 6.3 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R6).
  3. Change to red (pull it through on the last yarn-over of R19).
  4. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
  2. Change to orange (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 2.5 st from the line on the toy's left side, toward the back). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
  2. Change to orange (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 3 st from the line on the toy's left side, toward the back <!-- st 2.78 back -->). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.7 cm at the widest, 2.9 cm long; 9 rounds.
  2. Change to orange (pull it through on the last yarn-over of R3).
  3. Change to red (pull it through on the last yarn-over of R6).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 60 % -->

  1. Size before assembly: about 1.3 cm at the widest, 6.3 cm long; 18 rounds.
  2. Change to orange (pull it through on the last yarn-over of R5).
  3. Change to red (pull it through on the last yarn-over of R10).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 8<!-- the bend spreads over 8 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 8, on the centre top line). On the inner side draw rounds 8 and 9 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the ball body with head): between rounds 17 and 18, 9 st apart (count along round 17: about 4.7 st each side of the centre front line).
  • Embroidery in dark red thread (on the ball body with head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 19 and 20, 2 st from the centre front line, toward the toy's left ) → (in round 19, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 5.5 st from the centre front line, toward the toy's left ).

Ball body with head · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Big Grey Forest Spirit
    Generator
    HäkelnRemix

    Big Grey Forest Spirit

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Black Baby Dragon
    Generator
    HäkelnRemix

    Black Baby Dragon

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Blue Alien with Big Ears
    Generator
    HäkelnRemix

    Blue Alien with Big Ears

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Spider Hero
    Generator
    HäkelnRemix

    Little Spider Hero

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Sleepy Big Belly Bear
    Generator
    HäkelnRemix

    Sleepy Big Belly Bear

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Green Ogre
    Generator
    HäkelnRemix

    Little Green Ogre

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Burlap Sack Doll
    Generator
    HäkelnRemix

    Burlap Sack Doll

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Happy Snowman with Twig Arms
    Generator
    HäkelnRemix

    Happy Snowman with Twig Arms

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Yellow Capsule Helper
    Generator
    HäkelnRemix

    Yellow Capsule Helper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Ghost in a Mouse Costume
    Generator
    HäkelnRemix

    Ghost in a Mouse Costume

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pirate Boy in a Straw Hat
    Generator
    HäkelnRemix

    Pirate Boy in a Straw Hat

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done