Patrón de Baby Phoenix with Flame Crest a crochet (PDF gratis)

R1with charcoal: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9[grey] 4 sc [orange] 1 sc [red] 3 sc [grey] 1 sc in same st, 7 sc [red] inc, 5 sc [grey] 2 sc, inc, 5 sc [red] 2 sc, inc, 4 sc [grey] 3 sc, inc, 1 sc [red] 1 sc [orange] 5 sc [grey] inc(54)
R106 sc in orange, 19 sc in red, 4 sc in grey, 18 sc in red, 6 sc in orange, 1 sc in grey(54)
R11[orange] 6 sc [red] 2 sc, inc, 8 sc, inc, 8 sc, inc, 8 sc, inc, 8 sc, inc, 2 sc [orange] 6 sc, inc(60)
R12–146 sc in orange, 45 sc in red, 9 sc in orange(60)
R156 sc in orange, 46 sc in red, 8 sc in orange(60)
R165 sc in orange, 47 sc in red, 8 sc in orange(60)
R174 sc in orange, 48 sc in red, 8 sc in orange(60)
R18[orange] 3 sc [red] 1 sc, (dec, 8 sc) ×4, dec, 7 sc [orange] 1 sc, dec, 4 sc(54)
R191 sc in orange, 48 sc in red, 5 sc in orange(54)
R204 sc, (dec, 7 sc) ×5, dec, 3 sc(48)
R21(6 sc, dec) ×6(42)
R223 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R23(4 sc, dec) ×6(30)
R242 sc, (dec, 3 sc) ×5, dec, 1 sc(24)
R25(2 sc, dec) ×6(18)
R26(1 sc, dec) ×6(12)
R27dec ×6(6)
Size before assembly: about 8.1 cm at the widest, 6.3 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Change to grey (pull it through on the last yarn-over of R6).
Change to red (pull it through on the last yarn-over of R19).
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with yellow: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R3(3 sc, inc) ×2(10)
R410 sc(10)
R5–810 sc(10)
R9(3 sc, dec) ×2(8)
R10dec ×2, 1 sc, dec, 1 sc(5)
Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
Change to orange (pull it through on the last yarn-over of R4).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 2.5 st from the line on the toy's left side, toward the back). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

R1with yellow: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R3(3 sc, inc) ×2(10)
R4–810 sc(10)
R9(3 sc, dec) ×2(8)
R10dec ×2, 1 sc, dec, 1 sc(5)
Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
Change to orange (pull it through on the last yarn-over of R3).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 3 st from the line on the toy's left side, toward the back ). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

R1with yellow: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
Size before assembly: about 1 cm at the widest, 0.8 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with yellow: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
R31 sc, inc, 1 sc, inc, 2 sc, inc, 1 sc(11)
R42 sc, inc, 4 sc, inc, 3 sc(13)
R5–613 sc(13)
R713 sc(13)
R81 sc, dec, 2 sc, dec, 2 sc, dec, 2 sc(10)
R91 sc, dec, 1 sc, dec, 1 sc, dec, 1 sc(7)
Size before assembly: about 1.7 cm at the widest, 2.9 cm long; 9 rounds.
Change to orange (pull it through on the last yarn-over of R3).
Change to red (pull it through on the last yarn-over of R6).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.

R1with yellow: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R510 sc(10)
R6–1010 sc(10)
R11–1810 sc(10)
Size before assembly: about 1.3 cm at the widest, 6.3 cm long; 18 rounds.
Change to orange (pull it through on the last yarn-over of R5).
Change to red (pull it through on the last yarn-over of R10).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 8. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 8, on the centre top line). On the inner side draw rounds 8 and 9 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

R1with orange: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R39 sc(9)
R44 sc, dec, 3 sc(8)
Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.

R1with coral: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 10 mm (on the ball body with head): between rounds 17 and 18, 9 st apart (count along round 17: about 4.7 st each side of the centre front line).
Embroidery in dark red thread (on the ball body with head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 19 and 20, 2 st from the centre front line, toward the toy's left ) → (in round 19, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 5.5 st from the centre front line, toward the toy's left ).