amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Polar Bear Ball Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 55 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
8.2 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet polar bear ornament pattern: a Polar Bear Ball Ornament amigurumi, about 8 cm tall in fingering yarn with a 2 mm hook. A round white polar bear head with small ears, a cream muzzle, a black nose, pink cheeks and a green knitted hat with a red cuff and a white pompom, hung from a red loop. You need about 50 m of yarn: 30 m white, 5 m green, 5 m red, 5 m cream and 5 m pink. Plan on roughly 2 hours. A winter tree ornament that also makes a nice gift tag decoration or window charm. You can spin the 3D model and follow the round-by-round pattern, and the hat is just a short cone with a ribbed cuff.

Polar Bear Ball Ornament häkeln

Für Anfänger · 8 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 9 Teile in Runden: Panda ball, Ear ×2, Muzzle, Cheek ×2, Knitted hat, Pompom, Hanging loop (insgesamt 55 Runden).
  2. Fülle und montiere in 7 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 48 Runden fertig

  1. Size before assembly: about 6.2 cm at the widest, 4.9 cm long; 27 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.7 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2 mm at the centre) and turn rounds 3–5 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 17 mm across.<!-- (dish 70 %) -->

  1. A flat oval about 2.2 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.2 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 4.2 cm at the widest, 2 cm long; 10 rounds.
  2. Change to red (pull it through on the last yarn-over of R8).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.4 cm at the widest, 1.4 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 6 mm (on the panda ball): in round 18, 7 st apart (count along round 18: about 3.3 st each side of the centre front line).
  • Satin stitch (on the panda ball): in black thread in several layers so it stands out, a oval about 6 mm wide and 4.3 mm tall, horizontal stitches; centred in round 17, on the centre front line .

Panda ball · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done