amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Puppy with a Bone Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 137 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~5 Std.
Größe
13.9 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

This free crochet puppy pattern makes a sitting beagle-style pup holding a little cream bone between its front paws. The amigurumi puppy has a tan head with a white blaze, a white muzzle and chest, long floppy brown ears, a black saddle on its back and a white-tipped tail. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 14 cm (5.5 in) tall; the bone is two small tubes and four round knobs sewn across the tummy, and the eyes are 13 mm safety eyes. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a sweet gift for any dog lover.

Puppy with a Bone häkeln

Fortgeschritten · 14 cm hoch · etwa 5 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 18 Teile in Runden: Body, Head, Muzzle, Ear ×2, Cheek ×2, Bone half ×2, Bone knob ×4, Front paw ×2, Hind paw ×2, Tail (insgesamt 137 Runden).
  2. Fülle und montiere in 11 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 106 Runden fertig

  1. Size before assembly: about 8.2 cm at the widest, 6.7 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 9.4 cm at the widest, 8.7 cm long; 33 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.3 cm at the widest, 1.4 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4.9 cm at the widest, 7.2 cm long; 22 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 4.6 mm deep in front, a rounded back; about 49 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 17<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 17, 1.5 st from the centre bottom line, toward the back <!-- st 1.56 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.3 cm at the widest, 3.3 cm long; 9 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 3 cm long; 9 rounds.
  2. Change to tan (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4.5 cm at the widest, 2.5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 4.6 cm long; 13 rounds.
  2. Change to tan (pull it through on the last yarn-over of R4).
  3. Change to saddle (pull it through on the last yarn-over of R7).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the head): in round 17, 9 st apart (count along round 17: about 4.5 st each side of the centre front line).
  • Safety nose, oval, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose #1c1a1a.
  • Embroidery in nose thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in nose thread (on the muzzle), straight stitches through: (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, on the centre bottom line ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, on the centre bottom line.
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's right .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done