amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Puppy with a Bone receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 137 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
3/3
Tempo
~5 h
Tamanho
13.9 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

This free crochet puppy pattern makes a sitting beagle-style pup holding a little cream bone between its front paws. The amigurumi puppy has a tan head with a white blaze, a white muzzle and chest, long floppy brown ears, a black saddle on its back and a white-tipped tail. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 14 cm (5.5 in) tall; the bone is two small tubes and four round knobs sewn across the tummy, and the eyes are 13 mm safety eyes. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a sweet gift for any dog lover.

Como fazer Puppy with a Bone de crochê

Avançado · 14 cm de altura · cerca de 5 h · fio DK · agulha de 2.5 mm

  1. Faça as 18 partes em carreiras: Body, Head, Muzzle, Ear ×2, Cheek ×2, Bone half ×2, Bone knob ×4, Front paw ×2, Hind paw ×2, Tail (137 carreiras no total).
  2. Encha e monte em 11 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 11 separados

Mais como este

Todas as receitas de amigurumi cachorro →Tudo em animais →
  • Prévia de Winnie-the-Pooh with a Honey Pot
    Gerador
    FazerRemix

    Winnie-the-Pooh with a Honey Pot

    pelo gerador de receitas

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 106 carreiras feitas

  27. Size before assembly: about 8.2 cm at the widest, 6.7 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  28. → Start stuffing (firmly) and keep adding as you decrease.
  29. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  30. Size before assembly: about 9.4 cm at the widest, 8.7 cm long; 33 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  31. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  32. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 3.3 cm at the widest, 1.4 cm long; 6 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  15. Size before assembly: about 4.9 cm at the widest, 7.2 cm long; 22 rounds.
  16. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 4.6 mm deep in front, a rounded back; about 49 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 17<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 17, 1.5 st from the centre bottom line, toward the back <!-- st 1.56 back -->). If the ear sticks out, smooth it down along the head by hand.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 1.3 cm at the widest, 3.3 cm long; 9 rounds.
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 1.6 cm at the widest, 3 cm long; 9 rounds.
  8. Change to tan (pull it through on the last yarn-over of R3).
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  10. Size before assembly: about 4.5 cm at the widest, 2.5 cm long; 10 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  8. Size before assembly: about 1.6 cm at the widest, 4.6 cm long; 13 rounds.
  9. Change to tan (pull it through on the last yarn-over of R4).
  10. Change to saddle (pull it through on the last yarn-over of R7).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the head): in round 17, 9 st apart (count along round 17: about 4.5 st each side of the centre front line).
  • Safety nose, oval, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose #1c1a1a.
  • Embroidery in nose thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in nose thread (on the muzzle), straight stitches through: (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, on the centre bottom line ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, on the centre bottom line.
  • Satin stitch (on the hind paw) (2: one on each hind paw; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 9 mm tall, horizontal stitches; centred in round 4, 2.5 st from the centre bottom line, toward the toy's right .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Tigger the Bouncy Tiger
    Gerador
    FazerRemix

    Tigger the Bouncy Tiger

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Speedy Blue Hedgehog
    Gerador
    FazerRemix

    Speedy Blue Hedgehog

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de White Beagle with Black Ears
    Gerador
    FazerRemix

    White Beagle with Black Ears

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Grey Tabby Loaf Cat
    Gerador
    FazerRemix

    Grey Tabby Loaf Cat

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Confused Yellow Duck
    Gerador
    FazerRemix

    Confused Yellow Duck

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pudding Puppy in a Beret
    Gerador
    FazerRemix

    Pudding Puppy in a Beret

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Electric Yellow Mouse
    Gerador
    FazerRemix

    Electric Yellow Mouse

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Piglet in a Green Jumper
    Gerador
    FazerRemix

    Piglet in a Green Jumper

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Peter Rabbit in a Blue Jacket
    Gerador
    FazerRemix

    Peter Rabbit in a Blue Jacket

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Bunny in a Pink Hood
    Gerador
    FazerRemix

    Bunny in a Pink Hood

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Simple White Bunny in a Dress
    Gerador
    FazerRemix

    Simple White Bunny in a Dress

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done