Bunny with a Rain Cloud häkeln: Anleitung (PDF kostenlos)

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R10(BLO)54 sc(54)
R11–1654 sc(54)
R17(7 sc, dec) ×6(48)
R1848 sc(48)
R19(6 sc, dec) ×6(42)
R203 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R21(4 sc, dec) ×6(30)
R222 sc, (dec, 3 sc) ×5, dec, 1 sc(24)
R23(2 sc, dec) ×6(18)
R24(1 sc, dec) ×6(12)
R25dec ×6(6)
Size before assembly: about 5.6 cm at the widest, 4.6 cm long; 25 rounds.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with white: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
R42 sc, dec, 3 sc, dec, 1 sc(8)
Size before assembly: about 1 cm at the widest, 1 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with grey: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–79 sc(9)
Size before assembly: about 0.9 cm at the widest, 1.8 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with grey: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5–624 sc(24)
R7(2 sc, dec) ×6(18)
R8(1 sc, dec) ×6(12)
R9dec ×6(6)
Size before assembly: about 2.3 cm at the widest, 1.7 cm long; 9 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Press the piece flat to about 1.7 cm thick (oval cross-section). Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with light blue: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R510 sc(10)
R61 sc, dec, 1 sc, dec, 1 sc, dec, 1 sc(7)
R71 sc, dec, 1 sc, dec, 1 sc(5)
Size before assembly: about 1 cm at the widest, 1.8 cm long; 7 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 7 mm (on the ball body): in round 19, 6 st apart (count along round 19: about 3 st each side of the centre front line).
Embroidery in dark brown thread (on the ball body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 21 and 22, 1 st from the centre front line, toward the toy's left ) → (in round 21, 1.5 st from the centre front line, toward the toy's left ) → (in round 21, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 20 and 21, 3.5 st from the centre front line, toward the toy's left ).
Satin stitch (on the ball body): in rose thread, a oval about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred in round 18, on the centre front line .
Embroidery in dark brown thread (on the ball body), straight stitches through: (between rounds 16 and 17, 2 st from the centre front line, toward the toy's right ) → (in round 17, 1 st from the centre front line, toward the toy's right ) → (in round 17, on the centre front line) → (in round 17, 1 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 2 st from the centre front line, toward the toy's left ).