amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Shark in a Hoodie Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 93 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
11.1 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet shark pattern: a Shark in a Hoodie amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. Grey-blue shark face in a pink hood with a toothy grin, a grey fin on top and white drawstrings on the pink hoodie body. You need about 95 m of yarn: 55 m pink, 15 m dark pink, 15 m grey, 5 m white and 5 m light pink. Plan on roughly 3 hours. Pair it with a desk, a shelf or a pile of pillows as a cosy sea buddy, or give it to someone who loves sharks and soft pink hoodies. Spin the 3D model and follow the round-by-round pattern at your own pace.

Shark in a Hoodie häkeln

Mittel · 11 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 12 Teile in Runden: Hoodie body, Head (hood), Hood trim, Shark face, Dorsal fin, Sleeve ×2, Hand fin, Tail fin, Pocket, Cheek ×2 (insgesamt 93 Runden).
  2. Fülle und montiere in 10 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 76 Runden fertig

  1. Size before assembly: about 6.6 cm at the widest, 4.1 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 9.4 × 6.6 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 8.7 × 5.9 cm; 8 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With grey: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  1. Size before assembly: about 2.1 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 70 % -->

  1. A flat oval about 5.3 × 3.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.6 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the shark face): in round 3, 15 st apart (count along round 3: about 7.6 st each side of the centre top line).
  • Satin stitch (on the shark face): in rose thread, a oval about 26 mm wide and 8 mm tall, horizontal stitches; centred in round 4, on the centre bottom line .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's right ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's left .

Hoodie body · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done