amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Spotted Pony Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 99 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~4 Std.
Größe
13.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

This free crochet horse pattern makes a chibi spotted pony that sits on short legs with a big round head and dark little hooves. The amigurumi pony is white with chestnut patches, one of them around an eye, and has a soft peachy muzzle with a smile, pink-lined ears and a long brown yarn mane, forelock and tail. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 14 cm (5.5 in) tall; the spots are color changes, the hair is knotted yarn strands, and the eyes are 12 mm safety eyes. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Spotted Pony häkeln

Fortgeschritten · 14 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Body, Head, Muzzle, Ear ×2, Cheek ×2, Front leg with hoof ×2, Haunch (applique) ×2, Hind leg with hoof ×2, Tail base (insgesamt 103 Runden).
  2. Fülle und montiere in 9 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 12 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Pferd →Alles in tiere →
  • Vorschau von Winnie-the-Pooh with a Honey Pot
    Generator
    HäkelnRemix

    Winnie-the-Pooh with a Honey Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 90 Runden fertig

  1. Size before assembly: about 8 cm at the widest, 4.5 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.8 cm at the widest, 7.8 cm long; 30 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 7.9 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 4.7 × 3.1 cm at the widest, 3.2 cm long; 10 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With muzzle: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.2 cm at the widest, 2.5 cm long; 8 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.7 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.4 cm at the widest, 3.9 cm long; 12 rounds.
  2. Change to snow (pull it through on the last yarn-over of R5).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 35° around round 5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 5, on the centre front line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. A flat circle about 3.8 cm across; 5 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. For the right piece (on the toy's right) these rounds differ in colour (all other rounds as above):
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.8 cm at the widest, 3.1 cm long; 10 rounds.
  2. Change to snow (pull it through on the last yarn-over of R5).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 14, 11 st apart (count along round 14: about 5.7 st each side of the centre front line).
  • Satin stitch (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in nostril thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred between rounds 2 and 3, 3 st from the centre top line, toward the toy's left .
  • Embroidery in nostril thread (on the muzzle), straight stitches through: (between rounds 1 and 2, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ) → (between rounds 1 and 2, 1.5 st from the centre bottom line, toward the toy's right ).
  • Strands (mane) (on the head): cut 30 pieces of yarn (mane) about 80 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 5, on the centre front line -> in round 2, on the centre front line -> in round 1, 1.5 st from the centre front line, toward the toy's left -> in round 3, on the centre back line -> in round 8, on the centre back line -> in round 13, on the centre back line -> in round 18, on the centre back line -> in round 23, on the centre back line, evenly spaced. Trim to about 30 mm.
  • Fringe (on the head): cut 9 pieces of yarn (mane) about 64 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 5 and 6, 1.5 st from the centre front line, toward the toy's right -> between rounds 6 and 7, on the centre front line -> between rounds 5 and 6, 1.5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 22 mm.
  • Strands (mane) (on the tail base): cut 16 pieces of yarn (mane) about 120 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 1 and 2, on the centre top line -> between rounds 1 and 2, 1.5 st from the centre top line, toward the toy's left -> between rounds 1 and 2, on the centre bottom line -> between rounds 1 and 2, 1.5 st from the centre top line, toward the toy's right -> between rounds 1 and 2, on the centre top line , evenly spaced. Trim to about 50 mm. Give the strands a soft wave (see the last item of this section).
  • Curling the strands: Soft waves: untwist each strand into its plies and brush lightly.

Body · R1–R3

MR××××××VVVVVV×V×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tigger the Bouncy Tiger
    Generator
    HäkelnRemix

    Tigger the Bouncy Tiger

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Speedy Blue Hedgehog
    Generator
    HäkelnRemix

    Speedy Blue Hedgehog

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von White Beagle with Black Ears
    Generator
    HäkelnRemix

    White Beagle with Black Ears

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Grey Tabby Loaf Cat
    Generator
    HäkelnRemix

    Grey Tabby Loaf Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Confused Yellow Duck
    Generator
    HäkelnRemix

    Confused Yellow Duck

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pudding Puppy in a Beret
    Generator
    HäkelnRemix

    Pudding Puppy in a Beret

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Electric Yellow Mouse
    Generator
    HäkelnRemix

    Electric Yellow Mouse

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Piglet in a Green Jumper
    Generator
    HäkelnRemix

    Piglet in a Green Jumper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Peter Rabbit in a Blue Jacket
    Generator
    HäkelnRemix

    Peter Rabbit in a Blue Jacket

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Bunny in a Pink Hood
    Generator
    HäkelnRemix

    Bunny in a Pink Hood

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Simple White Bunny in a Dress
    Generator
    HäkelnRemix

    Simple White Bunny in a Dress

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V×V×V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done