amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Pflanzen

Christmas Wreath with a Face Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 11 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorPflanzen

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
9.5 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet wreath pattern: a Christmas Wreath with a Face amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A frilly green wreath with dark green stripes wears a big red bow on top, red berries and gold bells around the ring, and a winking face at the bottom. You need about 45 m of yarn: 15 m green, 10 m dark green, 5 m gold, 5 m red, 5 m rose and 5 m dark red. Plan on roughly 2 hours. Hang it on the tree or a door handle as a friendly wreath that smiles back, or give it to someone who decorates early. Rotate the 3D model and follow the round-by-round pattern as you work.

Christmas Wreath with a Face häkeln

Für Anfänger · 10 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 15 Teile in Runden: Wreath ring, Cheek ×2, Hanging loop, Bow loop ×2, Bow knot, Berry ×4, Bell ×4 (insgesamt 28 Runden).
  2. Fülle und montiere in 13 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

Mehr wie dieses

Alles in pflanzen →
  • Vorschau von Baby Tree Creature in a Pot
    Generator
    HäkelnRemix

    Baby Tree Creature in a Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 28 Runden fertig

  1. Size before assembly: about 8 cm at the widest, 4.9 cm long; 17 rounds.
  2. Change to dark green (pull it through on the last yarn-over of R2).
  3. Change to green (pull it through on the last yarn-over of R3).
  4. Change to dark green (pull it through on the last yarn-over of R5).
  5. Change to green (pull it through on the last yarn-over of R6).
  6. Change to dark green (pull it through on the last yarn-over of R8).
  7. Change to green (pull it through on the last yarn-over of R10).
  8. Change to dark green (pull it through on the last yarn-over of R11).
  9. Change to green (pull it through on the last yarn-over of R12).
  10. Change to dark green (pull it through on the last yarn-over of R14).
  11. Change to green (pull it through on the last yarn-over of R15).
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. A flat oval about 2.6 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With red: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 2.3 × 1.5 cm; 2 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running front to back. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark red: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.8 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.8 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Embroidery in dark brown thread (on the wreath ring), straight stitches through: (between rounds 11 and 12, 2.5 st from the centre bottom line, toward the toy's left ) → (in round 11, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 10 and 11, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 10, on the centre bottom line ) → (between rounds 10 and 11, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 11, 1.5 st from the centre bottom line, toward the toy's right ) → (between rounds 11 and 12, 2.5 st from the centre bottom line, toward the toy's right ).
  • Safety eye with a printed glint 12 mm (on the wreath ring): in round 15, 2 st from the centre bottom line, toward the toy's left .
  • Embroidery in dark brown thread (on the wreath ring), straight stitches through: (in round 15, 2.5 st from the centre bottom line, toward the toy's right ) → (between rounds 14 and 15, 2.5 st from the centre bottom line, toward the toy's right ) → (between rounds 14 and 15, 1.5 st from the centre bottom line, toward the toy's right ) → (in round 15, 1 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the wreath ring): in pink thread, a oval about 5 mm wide and 6 mm tall, horizontal stitches; centred between rounds 12 and 13, on the centre bottom line .

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Keychain
    Generator
    HäkelnRemix

    Mushroom Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Cactus Keychain
    Generator
    HäkelnRemix

    Cactus Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tulip in a Heart Pot with Bee
    Generator
    HäkelnRemix

    Tulip in a Heart Pot with Bee

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Shy Rose in a Mustard Pot
    Generator
    HäkelnRemix

    Shy Rose in a Mustard Pot

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Couple Cap to Cap
    Generator
    HäkelnRemix

    Mushroom Couple Cap to Cap

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Succulent Trio in a Long Pot
    Generator
    HäkelnRemix

    Succulent Trio in a Long Pot

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Family of Three
    Generator
    HäkelnRemix

    Mushroom Family of Three

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Monstera in a Pot with a Cat
    Generator
    HäkelnRemix

    Monstera in a Pot with a Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    2/5
    Nachgehäkelt
    0
  • Vorschau von Tiny Desk Cactus with a Bee
    Generator
    HäkelnRemix

    Tiny Desk Cactus with a Bee

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Smiling Pinecone Ornament
    Generator
    HäkelnRemix

    Smiling Pinecone Ornament

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Toadstool Ornament
    Generator
    HäkelnRemix

    Toadstool Ornament

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0