amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Bunny in a Frog Costume patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 71 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
10.5 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet bunny pattern: a Bunny in a Frog Costume amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A white bunny face looks out of a green frog onesie hood with two yellow frog eyes on top, while long white ears poke out beside them. You need about 80 m of yarn: 45 m green, 15 m white, 5 m light green, 5 m dark green, 5 m pink and 5 m light pink. Plan on roughly 3 hours. A sweet spring gift or desk buddy for bunny and frog fans. Spin the 3D model and follow the round-by-round pattern.

Cómo tejer Bunny in a Frog Costume a crochet

Intermedio · 11 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 15 piezas en vueltas: Frog suit body with head, Foot ×2, Pompom tail, Bunny face patch, Frog eye bump ×2, Ear ×2, Spot ×4, Cheek ×2 (71 vueltas en total).
  2. Rellénalo y móntalo en 9 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 61 vueltas hechas

  27. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 31 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  28. Change to green (pull it through on the last yarn-over of R13).
  29. → Start stuffing (firmly) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 2.1 cm at the widest, 1.6 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. A flat oval about 5.6 × 4.4 cm; 6 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With white: ch 5.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  8. Size before assembly: about 2 cm at the widest, 2.5 cm long; 8 rounds.
  9. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (lightly) and keep adding as you decrease.
  10. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 2.8 cm at the widest, 3.7 cm long; 11 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 28 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) -->

  3. Of these: low — 2 (left and right); no. 2 — 2 (left and right). A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the bunny face patch): in round 3, 12 st apart (count along round 3: about 6 st each side of the centre top line).
  • Satin stitch (on the bunny face patch): in dark pink thread, a oval about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre bottom line .
  • Embroidery in dark brown thread (on the bunny face patch) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
  • Safety eye with a printed glint 9 mm (on the frog eye bump) (2: one on each frog eye bump; the left one is described, the right is its mirror): in round 5, on the centre front line. Iris yellow #f2cf4a.

Frog suit body with head · R1–R3

MR××××××VVVVVV×V×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done