amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Bunny in a Frog Costume crochet pattern

  • Mathematically BalancedChecked by script: in all 71 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
2/3
Time
~3 h
Size
10.5 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet bunny pattern: a Bunny in a Frog Costume amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A white bunny face looks out of a green frog onesie hood with two yellow frog eyes on top, while long white ears poke out beside them. You need about 80 m of yarn: 45 m green, 15 m white, 5 m light green, 5 m dark green, 5 m pink and 5 m light pink. Plan on roughly 3 hours. A sweet spring gift or desk buddy for bunny and frog fans. Spin the 3D model and follow the round-by-round pattern.

How to crochet the Bunny in a Frog Costume

Intermediate · 11 cm tall · about 3 h · DK yarn · 2.5 mm hook

  1. Crochet the 15 pieces in rounds: Frog suit body with head, Foot ×2, Pompom tail, Bunny face patch, Frog eye bump ×2, Ear ×2, Spot ×4, Cheek ×2 (71 rounds in all).
  2. Stuff and put it together in 9 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 11 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 61 rounds done

  27. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 31 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  28. Change to green (pull it through on the last yarn-over of R13).
  29. → Start stuffing (firmly) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 2.1 cm at the widest, 1.6 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. A flat oval about 5.6 × 4.4 cm; 6 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With white: ch 5.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  8. Size before assembly: about 2 cm at the widest, 2.5 cm long; 8 rounds.
  9. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (lightly) and keep adding as you decrease.
  10. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 2.8 cm at the widest, 3.7 cm long; 11 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 28 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) -->

  3. Of these: low — 2 (left and right); no. 2 — 2 (left and right). A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the bunny face patch): in round 3, 12 st apart (count along round 3: about 6 st each side of the centre top line).
  • Satin stitch (on the bunny face patch): in dark pink thread, a oval about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre bottom line .
  • Embroidery in dark brown thread (on the bunny face patch) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
  • Safety eye with a printed glint 9 mm (on the frog eye bump) (2: one on each frog eye bump; the left one is described, the right is its mirror): in round 5, on the centre front line. Iris yellow #f2cf4a.

Frog suit body with head · R1–R3

MR××××××VVVVVV×V×V×V×

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    V×V×V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done