amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Snow Bunny Ornament patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 47 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
1/3
Tiempo
~2 h
Tamaño
10.4 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet bunny ornament pattern: a Snow Bunny Ornament amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A round white bunny head with two long ears with pink insides, black bead eyes, a pink nose, rosy cheeks and a mint scarf with a short tail, hung from a red loop. You need about 50 m of yarn: 35 m white, 5 m mint, 5 m red and 5 m pink. Plan on roughly 2 hours. It is a quick, beginner-friendly make that works as a tree ornament, a gift tag topper or a small winter present. Spin the 3D model and follow the round-by-round pattern; the head is one ball worked in the round.

Cómo tejer Snow Bunny Ornament a crochet

Para principiantes · 10 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 7 piezas en vueltas: Bunny head ball, Ear ×2, Cheek ×2, Scarf end, Hanging loop (47 vueltas en total).
  2. Rellénalo y móntalo en 5 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 34 vueltas hechas

  21. Size before assembly: about 7.5 cm at the widest, 6.1 cm long; 25 rounds.
  22. Change to mint (pull it through on the last yarn-over of R9).
  23. Change to white (pull it through on the last yarn-over of R11).
  24. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  25. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 1.8 cm at the widest, 4.9 cm long; 14 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.5 mm deep in front, a rounded back; about 18 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Size before assembly: an oval about 1.3 × 0.5 cm at the widest, 1.4 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  4. With mint: ch 4.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % -->

  3. Size before assembly: about 2.3 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 18 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the bunny head ball): in round 18, 7 st apart (count along round 18: about 3.6 st each side of the centre front line).
  • Satin stitch (on the bunny head ball): in pink thread, a oval about 5 mm wide and 3.5 mm tall, horizontal stitches; centred between rounds 16 and 17, on the centre front line .
  • Embroidery in brown thread (on the bunny head ball), straight stitches through: (between rounds 16 and 17, on the centre front line ) → (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ) → (in round 16, 1.5 st from the centre front line, toward the toy's right ).
  • Embroidery in brown thread (on the bunny head ball), straight stitches through: (between rounds 16 and 17, on the centre front line ) → (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ) → (in round 16, 1.5 st from the centre front line, toward the toy's left ).

Bunny head ball · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done