amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Coiled Christmas Dragon patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 133 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
3/3
Tiempo
~4 h
Tamaño
13.3 cm
Rareza
2/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet dragon pattern: a Coiled Christmas Dragon amigurumi, about 13 cm tall in DK yarn with a 2.5 mm hook. A green dragon curled in a coil, with gold horns, red wings, a striped scarf, a tiny Santa hat and a white snowflake puff at its mouth. You need about 115 m of yarn: 60 m green, 25 m red, 10 m cream, 10 m white, 5 m gold and 5 m pink. Plan on roughly 4 hours. It makes a cosy desk buddy or a gift for dragon fans who also love Christmas. Spin the 3D model and follow the round-by-round pattern.

Cómo tejer Coiled Christmas Dragon a crochet

Avanzado · 13 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Coiled body, Head and neck, Snout, Horn ×2, Santa hat, Pompom, Wing ×2, Snowflake, Cheek ×2 (164 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 94 vueltas hechas

  1. Size before assembly: about 2.7 cm at the widest, 34.2 cm long; 89 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre back line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in green, 1 sc in cream, 2 sc in green
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Bend ≈ 480° around round 12<!-- the bend spreads over 2 rounds --><!-- coil 2 pitch 16 -->. The piece rolls up into a spiral (about 1.3 turns) from round 12 to its end: after stuffing, roll it up starting from the last round (round 89) toward the side that faces backward on the finished toy; the turns lie close, each wider than the last. From the last round back to round 12 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

  1. Size before assembly: an oval about 7.7 × 6.1 cm at the widest, 7.2 cm long; 24 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the top of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With green: ch 6.
  3. Change to red (pull it through on the last yarn-over of R19).
  4. Change to white (pull it through on the last yarn-over of R21).
  5. Change to red (pull it through on the last yarn-over of R22).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 3 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest, 2.2 cm long; 6 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 10 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.4 cm at the widest, 6.6 cm long; 21 rounds.
  2. Change to white (pull it through on the last yarn-over of R18).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 115° around round 9<!-- the bend spreads over 5 rounds -->. Bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 9, 3.5 st from the centre front line, toward the toy's right <!-- st 3.55 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 11, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 4 × 7.5 cm; 8 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Flat motif — star (worked in rounds, one layer of fabric), about 3.2 × 2.8 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head and neck): in round 12, 8 st apart (count along round 12: about 4 st each side of the centre front line).
  • Satin stitch (on the snout): in black thread, a oval about 8 mm wide and 5 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in black thread (on the snout), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in black thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1.5 st from the centre bottom line, toward the toy's left ).

Abreviaturas

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet