PDF A4: materiales, cada vuelta con casilla, montaje y cara
Free crochet donut pattern: a Angry Donut amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. A round pink-frosted donut covered in rainbow sprinkles glares with slanted brows, glossy black eyes and a frowning mouth, while three grey puffs of steam rise from the top.
You need about 35 m of yarn: 15 m golden brown, 10 m pink, 5 m light grey and 5 m rose. Plan on roughly 1 hours.
It is a grumpy-cute gift for donut lovers and a good pick-me-up for a bad-mood Monday. Spin the 3D model and follow the round-by-round pattern whenever you like.
Cómo tejer Angry Donut a crochet
Para principiantes · 9 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm
Teje las 6 piezas en vueltas: Donut, Cheek ×2, Small steam puff ×2, Steam puff (28 vueltas en total).
Rellénalo y móntalo en 5 pasos; cada uno se ilumina en el modelo 3D donde va.
Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.
Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.
1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.
Cómo se teje
Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.
Size before assembly: about 8 cm at the widest, 4.9 cm long; 17 rounds.
Change to pink (pull it through on the last yarn-over of R10).
Fasten off leaving a long tail (30–40 cm) for sewing.
Insert the safety nose/eyes now, while the piece is open (positions: see “Face”).
Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing.
Do not stuff.
Size before assembly: about 1.2 cm at the widest, 1.4 cm long; 4 rounds.
→ Start stuffing (lightly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.
Size before assembly: about 1.6 cm at the widest, 1.5 cm long; 5 rounds.
→ Start stuffing (lightly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.
Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.
Safety eyes with a printed glint 10 mm (on the donut): in round 15, 32 st apart (count along round 15: about 1.8 st each side of the centre bottom line).
Embroidery in dark brown thread (on the donut), straight stitches through: (in round 13, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 14, on the centre bottom line) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 13, 1 st from the centre bottom line, toward the toy's right ).
Embroidery in dark brown thread (on the donut) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 17, 2.5 st from the centre bottom line, toward the toy's left ) → (in round 17, 2 st from the centre bottom line, toward the toy's left ) → (between rounds 16 and 17, 2 st from the centre bottom line, toward the toy's left ) → (in round 16, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 16, 1 st from the centre bottom line, toward the toy's left ).
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 3 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 14, 5.5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 12 and 13, 12 st from the centre top line, toward the toy's left.
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° clockwise (looking at that surface); centred in round 14, 12.5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 13, 7 st from the centre bottom line, toward the toy's left .
(on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 2 st from the centre top line, toward the toy's left .
Abreviaturas
MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done
Nadie ha mostrado el suyo todavía. Sé la primera persona.
Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 95° clockwise (looking at that surface); centred in round 16, 5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 16, 8 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 5 st from the centre bottom line, toward the toy's left .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 8.5 st from the centre bottom line, toward the toy's right .
Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 14, 12 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 12 and 13, 11 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred between rounds 14 and 15, 6.5 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 16, 10 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 7 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 3.5 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 13 and 14, 3 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred in round 16, 1 st from the centre top line, toward the toy's right .
