amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Comida

Bitten Gingerbread Man patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 55 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesComida

Dificultad
1/3
Tiempo
~2 h
Tamaño
11.4 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet gingerbread pattern: a Bitten Gingerbread Man amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. He is a brown gingerbread man with icing trim, a red bow, gumdrop buttons, wide shocked eyes and an open mouth, and one leg is just a pale bitten stump. You need about 60 m of yarn: 40 m light brown, 5 m pink, 5 m red, 5 m tan and 5 m green. Plan on roughly 2 hours. Make him as a tree ornament, a holiday table buddy or a gift for a baking fan. You can spin the 3D model and follow the round-by-round pattern, including the short stump leg.

Cómo tejer Bitten Gingerbread Man a crochet

Para principiantes · 11 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Body and head, Whole leg, Arm ×2, Green gumdrop button, Bow loop ×2, Bow knot, Red gumdrop button, Cheek ×2, Bitten leg stump (58 vueltas en total).
  2. Rellénalo y móntalo en 9 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 46 vueltas hechas

  24. Size before assembly: an oval about 7 × 5.4 cm at the widest, 9.3 cm long; 30 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  25. With light brown: ch 6.
  26. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  27. Press the piece flat to about 4.9 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 1.9 cm at the widest, 2.3 cm long; 7 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Size before assembly: about 1.6 cm at the widest, 2.7 cm long; 8 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  2. A flat circle about 1 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. Flat motif — triangle (worked in turned rows, one layer of fabric), about 1.1 × 1.6 cm; 3 rows.
  5. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  2. A flat circle about 0.8 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  2. A flat circle about 1 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  7. Change to tan (pull it through on the last yarn-over of R2).
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the body and head): between rounds 20 and 21, 7 st apart (count along round 20: about 3.5 st each side of the centre front line).
  • Embroidery in icing white thread (on the arm) (2: one on each arm; the left one is described, the right is its mirror), straight stitches through: (in round 3, 2.5 st from the centre front line, upward ) → (in round 4, 1.5 st from the centre front line, upward) → (in round 3, 0.5 st from the centre front line, upward ) → (in round 4, on the centre front line ) → (in round 3, 1 st from the centre front line, downward) → (in round 4, 2 st from the centre front line, downward ) → (in round 3, 2.5 st from the centre front line, downward ).
  • Embroidery in icing white thread (on the whole leg), straight stitches through: (in round 3, 2.5 st from the centre front line, toward the toy's right ) → (in round 4, 2 st from the centre front line, toward the toy's right ) → (in round 3, 1 st from the centre front line, toward the toy's right ) → (in round 4, on the centre front line ) → (in round 3, 1 st from the centre front line, toward the toy's left ) → (in round 4, 2 st from the centre front line, toward the toy's left ) → (in round 3, 3 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body and head): in black thread, a oval about 8 mm wide and 10 mm tall, horizontal stitches; centred between rounds 17 and 18, on the centre front line .
  • Embroidery in icing white thread (on the body and head), straight stitches through: (in round 23, 4 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 3 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in icing white thread (on the body and head), straight stitches through: (in round 23, 4 st from the centre front line, toward the toy's left ) → (between rounds 23 and 24, 3 st from the centre front line, toward the toy's left ) → (between rounds 23 and 24, 2 st from the centre front line, toward the toy's left ).

Abreviaturas

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet