amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Goat Christmas Ornament patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 58 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
1/3
Tiempo
~2 h
Tamaño
5.7 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet goat pattern: a Goat Christmas Ornament amigurumi, about 6 cm tall in fingering yarn with a 2 mm hook. A round white goat with a small cream muzzle set into its face, a tiny chin beard, short curved grey horns, floppy ears, dark hooves and a red-and-white striped scarf looks out in surprise, with a gold loop on its head for hanging. You need about 50 m of yarn: 15 m cream, 5 m red, 5 m grey, 5 m charcoal, 5 m beige, 5 m soft gold, 5 m blush pink and 5 m white. Plan on roughly 2 hours. It is made to hang on a Christmas tree or a window, and it also makes a sweet small gift for goat lovers or for anyone born in a goat year. You can spin the 3D model and follow the round-by-round pattern.

Cómo tejer Goat Christmas Ornament a crochet

Para principiantes · 6 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 15 piezas en vueltas: Mochi ball, Horn ×2, Ear ×2, Hanging loop, Muzzle, Beard, Cheek ×2, Scarf tail, Hoof ×4 (58 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 13 reunidos

RemixTejerlo

Muestra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 51 vueltas hechas

  1. Size before assembly: about 4.3 cm at the widest, 3.5 cm long; 19 rounds.
  2. Change to red (pull it through on the last yarn-over of R5).
  3. Change to cream (pull it through on the last yarn-over of R6).
  4. Change to red (pull it through on the last yarn-over of R7).
  5. Change to cream (pull it through on the last yarn-over of R8).
  6. Change to red (pull it through on the last yarn-over of R9).
  7. Change to cream (pull it through on the last yarn-over of R10).
  8. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.9 cm at the widest, 2.6 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 125° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 5, 0.5 st from the centre back line, toward the toy's left <!-- st 0.55 left -->). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1 cm at the widest, 1.5 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 0.8 mm deep in front, a rounded back; about 10 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. Size before assembly: an oval about 1.7 × 1.4 cm at the widest, 0.9 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With beige: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.5 cm at the widest, 0.9 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1 × 0.4 cm at the widest, 1.9 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With red: ch 4.
  3. Change to white (pull it through on the last yarn-over of R2).
  4. Change to red (pull it through on the last yarn-over of R4).
  5. Change to white (pull it through on the last yarn-over of R6).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % -->

  1. Of these: front — 2 (left and right); back — 2 (left and right). Size before assembly: about 0.8 cm at the widest, 1.1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 6 mm (on the mochi ball): between rounds 12 and 13, 9 st apart (count along round 12: about 4.4 st each side of the centre front line).
  • Satin stitch (on the muzzle): in dark brown thread, a oval about 3.2 mm wide and 2.2 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Satin stitch (on the muzzle): in dark brown thread, a oval about 3 mm wide and 2 mm tall, horizontal stitches; centred between rounds 2 and 3, on the centre bottom line .
  • Embroidery in dark brown thread (on the mochi ball) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 15, 2 st from the centre front line, toward the toy's left ) → (in round 16, 2.5 st from the centre front line, toward the toy's left ) → (in round 15, 4 st from the centre front line, toward the toy's left ).

Mochi ball · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done