Patrón de Leggy Bear a crochet (PDF gratis)

R1with brown: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(7 sc, inc) ×6(54)
R10–1754 sc(54)
R184 sc, (dec, 7 sc) ×5, dec, 3 sc(48)
R19(6 sc, dec) ×6(42)
R203 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
R21(4 sc, dec) ×6(30)
R222 sc, (dec, 3 sc) ×5, dec, 1 sc(24)
R23(2 sc, dec) ×6(18)
R24(1 sc, dec) ×6(12)
R25dec ×6(6)
Size before assembly: about 7.5 cm at the widest, 6.1 cm long; 25 rounds.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc, inc, 1 sc, inc(22)
R4–522 sc(22)
R61 sc, dec, 2 sc, dec, 2 sc, dec, 3 sc, dec, 2 sc, dec, 2 sc(17)
R71 sc, dec, 1 sc, dec, 1 sc, dec, 2 sc, dec, 1 sc, dec, 1 sc(12)
R812 sc(12)
R9(4 sc, dec) ×2(10)
R10–3310 sc(10)
Size before assembly: an oval about 3.2 × 2 cm at the widest, 11.5 cm long; 33 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
With red: ch 5.
Change to tan (pull it through on the last yarn-over of R6).
Change to light blue (pull it through on the last yarn-over of R8).
Change to blue (pull it through on the last yarn-over of R9).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with tan: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R418 sc(18)
R5(1 sc, dec) ×6(12)
R6dec ×6(6)
Size before assembly: about 3.3 cm at the widest, 1.5 cm long; 6 rounds.
Change to brown (pull it through on the last yarn-over of R2).
→ This piece is not stuffed.
Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–3 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 3.1 mm at the centre) and turn rounds 4–6 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 33 mm across.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R420 sc(20)
Size before assembly: an oval about 3 × 2.2 cm at the widest, 1 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With tan: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with brown: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
R310 sc(10)
Size before assembly: about 1.4 cm at the widest, 0.9 cm long; 3 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 12 mm (on the bear head and body): between rounds 16 and 17, 8 st apart (count along round 16: about 4 st each side of the centre front line).
Satin stitch (on the muzzle): in dark thread, a oval about 9 mm wide and 6 mm tall, horizontal stitches; centred in round 1, on the centre top line .
Embroidery in dark thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
Embroidery in dark thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1.5 st from the centre bottom line, toward the toy's left ).

Leggy Bear patrón de crochet