amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Baby Phoenix with Flame Crest patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 83 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
2/3
Tiempo
~3 h
Tamaño
9.7 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet phoenix pattern: a Baby Phoenix with Flame Crest amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. A round red chick with a golden belly, a fan of flame feathers on its head and tail, flame-tipped wings, a determined little frown and a sooty grey bottom, as if it has just risen from the ashes. You need about 75 m of yarn: 30 m red, 20 m orange, 10 m yellow, 5 m charcoal, 5 m grey and 5 m coral. Plan on roughly 2 hours. It makes a fun desk buddy or a gift for fantasy and bird lovers, and it is a good project if you like playing with colour changes. You can spin the 3D model and follow the round-by-round pattern.

Cómo tejer Baby Phoenix with Flame Crest a crochet

Intermedio · 10 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 14 piezas en vueltas: Ball body with head, Centre flame tuft, Flame tuft ×2, Beak, Wing ×2, Tail feather ×3, Foot ×2, Cheek ×2 (83 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 62 vueltas hechas

  26. Size before assembly: about 8.1 cm at the widest, 6.3 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  27. Change to grey (pull it through on the last yarn-over of R6).
  28. Change to red (pull it through on the last yarn-over of R19).
  29. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
  9. Change to orange (pull it through on the last yarn-over of R4).
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 2.5 st from the line on the toy's left side, toward the back). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  7. Size before assembly: about 1.3 cm at the widest, 3.4 cm long; 10 rounds.
  8. Change to orange (pull it through on the last yarn-over of R3).
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 3<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 3, 3 st from the line on the toy's left side, toward the back <!-- st 2.78 back -->). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  4. Size before assembly: about 1 cm at the widest, 0.8 cm long; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 1.7 cm at the widest, 2.9 cm long; 9 rounds.
  10. Change to orange (pull it through on the last yarn-over of R3).
  11. Change to red (pull it through on the last yarn-over of R6).
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 60 % -->

  8. Size before assembly: about 1.3 cm at the widest, 6.3 cm long; 18 rounds.
  9. Change to orange (pull it through on the last yarn-over of R5).
  10. Change to red (pull it through on the last yarn-over of R10).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 35 %). Bend ≈ 70° around round 8<!-- the bend spreads over 8 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 8, on the centre top line). On the inner side draw rounds 8 and 9 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  5. Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the ball body with head): between rounds 17 and 18, 9 st apart (count along round 17: about 4.7 st each side of the centre front line).
  • Embroidery in dark red thread (on the ball body with head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 19 and 20, 2 st from the centre front line, toward the toy's left ) → (in round 19, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 5.5 st from the centre front line, toward the toy's left ).

Ball body with head · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done