amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

White Beagle with Black Ears patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 74 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
9.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A crochet amigurumi inspired by Snoopy from Peanuts: a white beagle with a long snout, a big black nose, black floppy ears and a red collar. About 9 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Peanuts Worldwide.

Cómo tejer White Beagle with Black Ears a crochet

Intermedio · 9 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 10 piezas en vueltas: Body, Snout, Ear ×2, Collar, Tail, Arm ×2, Foot ×2 (74 vueltas en total).
  2. Rellénalo y móntalo en 7 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 8 reunidos

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixTejerlo

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 45 vueltas hechas

  21. Size before assembly: about 7.7 cm at the widest, 8.7 cm long; 31 rounds.
  22. → Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: an oval about 3.9 × 2.7 cm at the widest, 3.9 cm long; 12 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With white: ch 5.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  8. Size before assembly: about 3.3 cm at the widest, 4.5 cm long; 14 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 33 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 14<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 14, 0.5 st from the centre bottom line, toward the back <!-- st 0.68 back -->). If the ear sticks out, smooth it down along the head by hand.

  3. Size before assembly: about 6.9 cm at the widest, 0.7 cm long; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. Size before assembly: about 1.2 cm at the widest, 2 cm long; 6 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 50 % -->

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Satin stitch (on the snout): in black thread, a oval about 14 mm wide and 10 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in black thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's left ) → (between rounds 6 and 7, 3 st from the centre bottom line, toward the toy's left ) → (between rounds 7 and 8, 8.5 st from the centre top line, toward the toy's left ).
  • Blush about 9 mm, dry pastel or blush (on the body, both sides): between rounds 19 and 20, 6.5 st from the centre front line, toward the toy's left . Colour blush.
  • Satin stitch (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 6 mm wide and 9 mm tall, horizontal stitches; centred between rounds 22 and 23, 2.5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the body): in white thread in several layers so it stands out, a oval about 2.6 mm wide and 3 mm tall, horizontal stitches; centred between rounds 23 and 24, 2.5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the body): in white thread in several layers so it stands out, a oval about 2.6 mm wide and 3 mm tall, horizontal stitches; centred between rounds 23 and 24, 2 st from the centre front line, toward the toy's right .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done