White Beagle with Black Ears receita de crochê

Equilibrada matematicamenteVerificado por script: nas 74 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade: 2/3
Tempo: ~3 h
Tamanho: 9.1 cm
Esquisitice: 1/5

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A crochet amigurumi inspired by Snoopy from Peanuts: a white beagle with a long snout, a big black nose, black floppy ears and a red collar. About 9 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Peanuts Worldwide.

Como fazer White Beagle with Black Ears de crochê

Intermediário · 9 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

Faça as 10 partes em carreiras: Body, Snout, Ear ×2, Collar, Tail, Arm ×2, Foot ×2 (74 carreiras no total).
Encha e monte em 7 etapas; cada uma acende no modelo 3D onde a parte vai.
Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 8 separados

Fio whiteespessura DK55 m
Fio blackespessura DK15 m
Fio collarespessura DK5 m
Agulha de crochêde 2.5 mm1
Olhos de segurançaou borde-os para crianças pequenas2
Enchimentofibra siliconada30 g
Marcador de pontospara carreiras em espiral1
Agulha de tapeçariapara costurar as partes1

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Tudo em animais →

Gerador
Winnie-the-Pooh with a Honey Pot
pelo gerador de receitas

Remix Fazer

0 de 45 carreiras feitas

R1starting in the 2nd ch from hook: sc 3, 3 sc in the last ch; continue along the other side of the chain: sc 2, 2 sc in the last ch (the one you made the first sc in)(10)
R2(inc ×2, 1 sc, inc, 1 sc) ×2(16)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(22)
R44 sc, inc, 1 sc, inc, 9 sc, inc, 1 sc, inc, 3 sc(26)
R5–1226 sc(26)
Size before assembly: an oval about 3.9 × 2.7 cm at the widest, 3.9 cm long; 12 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With white: ch 5.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with black: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–1118 sc(18)
R122 sc, (dec, 4 sc) ×2, dec, 2 sc(15)
R13(3 sc, dec) ×3(12)
R1412 sc(12)
Size before assembly: about 3.3 cm at the widest, 4.5 cm long; 14 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 33 mm wide. Keep the opening a curve, hollow side forward, not a straight line. Bend ≈ 90° around round 14. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 14, 0.5 st from the centre bottom line, toward the back ). If the ear sticks out, smooth it down along the head by hand.

R1with collar: ch 54 and join into a ring with a sl st in the first ch (do not twist); 54 sc, one in each ch of the ring(54)
R254 sc(54)
Size before assembly: about 6.9 cm at the widest, 0.7 cm long; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with white: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–69 sc(9)
Size before assembly: about 1.2 cm at the widest, 2 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with white: 6 sc in MR(6)
R2(1 sc, inc) ×3(9)
R3–49 sc(9)
R57 sc, dec(8)
Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R312 sc(12)
R42 sc, dec, 4 sc, dec, 2 sc(10)
Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Satin stitch (on the snout): in black thread, a oval about 14 mm wide and 10 mm tall, horizontal stitches; centred in round 1, on the centre top line .
Embroidery in black thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's left ) → (between rounds 6 and 7, 3 st from the centre bottom line, toward the toy's left ) → (between rounds 7 and 8, 8.5 st from the centre top line, toward the toy's left ).
Blush about 9 mm, dry pastel or blush (on the body, both sides): between rounds 19 and 20, 6.5 st from the centre front line, toward the toy's left . Colour blush.
Satin stitch (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 6 mm wide and 9 mm tall, horizontal stitches; centred between rounds 22 and 23, 2.5 st from the centre front line, toward the toy's left .
Satin stitch (on the body): in white thread in several layers so it stands out, a oval about 2.6 mm wide and 3 mm tall, horizontal stitches; centred between rounds 23 and 24, 2.5 st from the centre front line, toward the toy's left .
Satin stitch (on the body): in white thread in several layers so it stands out, a oval about 2.6 mm wide and 3 mm tall, horizontal stitches; centred between rounds 23 and 24, 2 st from the centre front line, toward the toy's right .