amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales marinos

Whale in a Beanie Ornament patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 59 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales marinos

Dificultad
1/3
Tiempo
~2 h
Tamaño
7.9 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet whale ornament pattern: a Whale in a Beanie Ornament amigurumi, about 8 cm tall in fingering yarn with a 2 mm hook. It is a round blue whale with a white belly, a happy smile, pink cheeks, little flippers and a red bobble beanie with a hanging loop. You need about 50 m of yarn: 25 m blue, 10 m white, 10 m red and 5 m pink. Plan on roughly 2 hours. A cheerful tree ornament, and a quick make for beginners. Gift it to a sea lover and use the 3D model to spin it while you follow the round-by-round pattern.

Cómo tejer Whale in a Beanie Ornament a crochet

Para principiantes · 8 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 10 piezas en vueltas: Body ball, Flipper ×2, Tail fluke ×2, Cheek ×2, Beanie, Pompom, Hanging loop (59 vueltas en total).
  2. Rellénalo y móntalo en 7 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

RemixTejerlo

Muestra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 55 vueltas hechas

  24. Size before assembly: about 6 cm at the widest, 4.4 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  25. Change to blue (pull it through on the last yarn-over of R16).
  26. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  27. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 1 cm at the widest, 1.4 cm long; 5 rounds.
  7. → Start stuffing (lightly) and keep adding as you decrease.
  8. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 65 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 1.5 cm at the widest, 1.7 cm long; 7 rounds.
  8. → Start stuffing (lightly) and keep adding as you decrease.
  9. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  12. Size before assembly: about 3.2 cm at the widest, 2.8 cm long; 11 rounds.
  13. Change to white (pull it through on the last yarn-over of R7).
  14. Change to red (pull it through on the last yarn-over of R10).
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 30° around round 4<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 4, 6 st from the centre front line, toward the toy's left <!-- st 5.92 left -->). On the inner side draw rounds 3 and 5 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  7. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Size before assembly: about 1.3 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 14 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the body ball): in round 16, 9 st apart (count along round 16: about 4.5 st each side of the centre front line).
  • Embroidery in navy thread (on the body ball), straight stitches through: (between rounds 14 and 15, 2.5 st from the centre front line, toward the toy's right ) → (in round 14, 1 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, on the centre front line ) → (in round 14, 1 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 2.5 st from the centre front line, toward the toy's left ).

Body ball · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done