amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais marinhos

Whale in a Beanie Ornament receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 59 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais marinhos

Dificuldade
1/3
Tempo
~2 h
Tamanho
7.9 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

Free crochet whale ornament pattern: a Whale in a Beanie Ornament amigurumi, about 8 cm tall in fingering yarn with a 2 mm hook. It is a round blue whale with a white belly, a happy smile, pink cheeks, little flippers and a red bobble beanie with a hanging loop. You need about 50 m of yarn: 25 m blue, 10 m white, 10 m red and 5 m pink. Plan on roughly 2 hours. A cheerful tree ornament, and a quick make for beginners. Gift it to a sea lover and use the 3D model to spin it while you follow the round-by-round pattern.

Como fazer Whale in a Beanie Ornament de crochê

Para iniciantes · 8 cm de altura · cerca de 2 h · fio fingering · agulha de 2 mm

  1. Faça as 10 partes em carreiras: Body ball, Flipper ×2, Tail fluke ×2, Cheek ×2, Beanie, Pompom, Hanging loop (59 carreiras no total).
  2. Encha e monte em 7 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 9 separados

Mais como este

Todas as receitas de amigurumi baleia →Tudo em animais marinhos →
  • Prévia de Tiny Blue Turtle
    Gerador
    FazerRemix

    Tiny Blue Turtle

    pelo gerador de receitas

RemixFazer

Amostra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 55 carreiras feitas

  24. Size before assembly: about 6 cm at the widest, 4.4 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  25. Change to blue (pull it through on the last yarn-over of R16).
  26. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  27. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 1 cm at the widest, 1.4 cm long; 5 rounds.
  7. → Start stuffing (lightly) and keep adding as you decrease.
  8. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 65 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 1.5 cm at the widest, 1.7 cm long; 7 rounds.
  8. → Start stuffing (lightly) and keep adding as you decrease.
  9. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  12. Size before assembly: about 3.2 cm at the widest, 2.8 cm long; 11 rounds.
  13. Change to white (pull it through on the last yarn-over of R7).
  14. Change to red (pull it through on the last yarn-over of R10).
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 30° around round 4<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 4, 6 st from the centre front line, toward the toy's left <!-- st 5.92 left -->). On the inner side draw rounds 3 and 5 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  7. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Size before assembly: about 1.3 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 14 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the body ball): in round 16, 9 st apart (count along round 16: about 4.5 st each side of the centre front line).
  • Embroidery in navy thread (on the body ball), straight stitches through: (between rounds 14 and 15, 2.5 st from the centre front line, toward the toy's right ) → (in round 14, 1 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, on the centre front line ) → (in round 14, 1 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 2.5 st from the centre front line, toward the toy's left ).

Body ball · R1–R5

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pink Starfish in Green Shorts
    Gerador
    FazerRemix

    Pink Starfish in Green Shorts

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de No-Sew Mini Whale
    Gerador
    FazerRemix

    No-Sew Mini Whale

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de No-Sew Narwhal
    Gerador
    FazerRemix

    No-Sew Narwhal

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Squid Keychain
    Gerador
    FazerRemix

    Squid Keychain

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Worry Octopus
    Gerador
    FazerRemix

    Worry Octopus

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Seal Doing a Belly Flop
    Gerador
    FazerRemix

    Seal Doing a Belly Flop

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Kraken in a Teacup
    Gerador
    FazerRemix

    Kraken in a Teacup

    pelo gerador de receitas

    Dificuldade
    3/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Axolotl Leaning on a Heart
    Gerador
    FazerRemix

    Axolotl Leaning on a Heart

    pelo gerador de receitas

    Dificuldade
    3/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Gamer Axolotl with Headphones
    Gerador
    FazerRemix

    Gamer Axolotl with Headphones

    pelo gerador de receitas

    Dificuldade
    3/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Seahorse Holding a Pearl
    Gerador
    FazerRemix

    Seahorse Holding a Pearl

    pelo gerador de receitas

    Dificuldade
    3/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Offended Puffed-Up Pufferfish
    Gerador
    FazerRemix

    Offended Puffed-Up Pufferfish

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
    • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done