amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Fox with a Mushroom patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 116 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~4 h
Tamaño
13.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet fox pattern for a little orange amigurumi fox who sits beside a small red toadstool with white dots. This fox plushie has tall pointed ears with dark tips, a cream snout and chest, rosy cheeks and a big bushy tail with a white tip that curls around to the front. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and ends up about 13 cm (5 in) tall, with 12 mm safety eyes, a safety nose and a stuffed mushroom sewn onto one foot. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece, a cozy make for autumn.

Cómo tejer Fox with a Mushroom a crochet

Avanzado · 13 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 14 piezas en vueltas: Body, Head, Snout, Ear ×2, Foot ×2, Mushroom stem, Mushroom cap, Arm ×2, Tail, Cheek ×2 (116 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

Más como este

Todos los patrones de zorro →Todos los patrones de seta →Todo en animales →
  • Vista previa de Winnie-the-Pooh with a Honey Pot
    Generador
    TejerloRemix

    Winnie-the-Pooh with a Honey Pot

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 103 vueltas hechas

  1. Size before assembly: about 6.7 cm at the widest, 5.7 cm long; 19 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8 cm at the widest, 5.8 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Change to orange (pull it through on the last yarn-over of R21).
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.7 cm at the widest, 4 cm long; 12 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to orange (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 4.3 mm deep in front, a rounded back; about 37 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 1.9 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With brown: ch 4.
  3. Change to orange (pull it through on the last yarn-over of R2).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.7 cm at the widest, 2.5 cm long; 11 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 2.7 cm long; 8 rounds.
  2. Change to orange (pull it through on the last yarn-over of R2).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4.1 cm at the widest, 7.4 cm long; 21 rounds.
  2. Change to orange (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 14<!-- the bend spreads over 8 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 14, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 9 to round 19, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 10 rounds) and fasten off inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 14, 9 st apart (count along round 14: about 4.7 st each side of the centre front line).
  • Safety nose, oval, 7×5.5 mm (on the snout): between rounds 1 and 2, on the centre top line . Colour brown #4a2f26.
  • Embroidery in brown thread (on the snout), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (between rounds 3 and 4, on the centre bottom line ).
  • Embroidery in brown thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 3 and 4, on the centre bottom line ) → (in round 4, 1 st from the centre bottom line, toward the toy's left ) → (in round 4, 1.5 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the mushroom cap): in cream thread, a oval about 4 mm wide and 4 mm tall, horizontal stitches; centred in round 3, on the centre front line.
  • Satin stitch (on the mushroom cap): in cream thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 5, 5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the mushroom cap): in cream thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 5, 5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the mushroom cap): in cream thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 5, on the centre back line.
  • Satin stitch (on the mushroom cap): in cream thread, a oval about 3 mm wide and 3 mm tall, horizontal stitches; centred in round 1, on the centre front line.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    por el generador de patrones
    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Tigger the Bouncy Tiger
    Generador
    TejerloRemix

    Tigger the Bouncy Tiger

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Speedy Blue Hedgehog
    Generador
    TejerloRemix

    Speedy Blue Hedgehog

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de White Beagle with Black Ears
    Generador
    TejerloRemix

    White Beagle with Black Ears

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Grey Tabby Loaf Cat
    Generador
    TejerloRemix

    Grey Tabby Loaf Cat

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Confused Yellow Duck
    Generador
    TejerloRemix

    Confused Yellow Duck

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Pudding Puppy in a Beret
    Generador
    TejerloRemix

    Pudding Puppy in a Beret

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Electric Yellow Mouse
    Generador
    TejerloRemix

    Electric Yellow Mouse

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Piglet in a Green Jumper
    Generador
    TejerloRemix

    Piglet in a Green Jumper

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Peter Rabbit in a Blue Jacket
    Generador
    TejerloRemix

    Peter Rabbit in a Blue Jacket

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Bunny in a Pink Hood
    Generador
    TejerloRemix

    Bunny in a Pink Hood

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Simple White Bunny in a Dress
    Generador
    TejerloRemix

    Simple White Bunny in a Dress

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done