amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Black Cat in a Witch Hat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 81 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
15.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet black cat pattern for a chubby amigurumi kitten in a pointed purple witch hat, made for Halloween. This black kitty plushie has big golden eyes with a glint, a tiny pink nose, pink cheeks and pink-lined ears peeking out under the brim, while an orange band and a little star brighten the hat. Head and body are one piece worked in the round in single crochet with DK yarn and a 2.5 mm hook, the hat is crocheted from the tip down with a flat brim, and the kitty stands about 15 cm (6 in) tall with the hat on. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes.

Comment crocheter Black Cat in a Witch Hat

Intermédiaire · 15 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 12 pièces en rangs : Body, Ear ×2, Witch hat, Star, Tail, Arm ×2, Foot ×2, Cheek ×2 (83 rangs au total).
  2. Rembourrez et assemblez en 8 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 62

  1. Size before assembly: about 7.7 cm at the widest, 8.7 cm long; 31 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: about 5.9 cm at the widest, 6.3 cm long; 20 rounds.
  2. Change to band (pull it through on the last yarn-over of R14).
  3. Change to hat (pull it through on the last yarn-over of R16).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — star (worked in rounds, one layer of fabric), about 2.6 × 2.8 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 6<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 0.5 st from the centre top line, toward the toy's left <!-- st 0.74 left -->). On the inner side draw rounds 5 and 7 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 50 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 16 mm (on the body): between rounds 20 and 21, 7 st apart (count along round 20: about 3.5 st each side of the centre front line). Iris iris #ffd23f.
  • Satin stitch (on the body): in nose thread, a triangle about 5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 18 and 19, on the centre front line .
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, on the centre front line ) → (between rounds 17 and 18, on the centre front line ) → (in round 17, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's right ).
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, on the centre front line ) → (between rounds 17 and 18, on the centre front line ) → (in round 17, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done