amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Buck Tooth Bunny modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 61 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
7.9 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet bunny pattern: a Buck Tooth Bunny amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A round grey bunny with long floppy ears lined in pink, crossed derpy eyes, a pink nose and two big white buck teeth. You need about 70 m of yarn: 55 m grey, 5 m pink, 5 m light grey and 5 m coral. Plan on roughly 2 hours. It is a goofy little gift for anyone who needs a laugh, or a funny shelf buddy for bunny fans. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Buck Tooth Bunny

Pour débutants · 8 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 8 pièces en rangs : Body with head, Long floppy ear ×2, Foot ×2, Pompom tail, Cheek ×2 (61 rangs au total).
  2. Rembourrez et assemblez en 5 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 52

  1. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 31 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.6 cm at the widest, 5.7 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.8 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 17<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 17, 0.5 st from the centre bottom line, toward the back <!-- st 0.64 back -->). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.1 cm at the widest, 1.6 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 13×13 mm (on the body with head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 20 and 21, 4.5 st from the centre front line, toward the toy's left.
  • Safety eyes 6 mm (on the body with head): between rounds 20 and 21, 6 st apart (count along round 20: about 3 st each side of the centre front line).
  • Satin stitch (on the body with head) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread, a oval about 8.5 mm wide and 13 mm tall, horizontal stitches; centred in round 17, 1 st from the centre front line, toward the toy's left .
  • Satin stitch (on the body with head): in rose thread, a oval about 6 mm wide and 4 mm tall, horizontal stitches; centred between rounds 19 and 20, on the centre front line .
  • Embroidery in dark brown thread (on the body with head), straight stitches through: (in round 19, on the centre front line ) → (in round 18, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the body with head), straight stitches through: (in round 19, on the centre front line ) → (in round 18, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 2 st from the centre front line, toward the toy's left ).

Body with head · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done