amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux marins

Clownfish modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 61 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux marins

Difficulté
1/3
Temps
~2 h
Taille
9 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet fish pattern for a chubby clownfish with big shiny eyes and a little round open mouth. This amigurumi clownfish is bright orange with three white bands outlined in black, and every fin, from the round dorsal fin to the fan tail, has a crisp black edge. The body is worked in the round in single crochet from the tail to the face with the stripes as color changes, the fins are small lightly stuffed pieces sewn on, and with DK yarn, a 2.5 mm hook and 14 mm safety eyes it is about 9 cm (3.5 in) tall. Follow it round by round with stitch counts and turn the interactive 3D model to see where every fin goes.

Comment crocheter Clownfish

Pour débutants · 9 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 8 pièces en rangs : Body, Tail fin, Dorsal fin, Lower fin, Side fin ×2, Cheek ×2 (61 rangs au total).
  2. Rembourrez et assemblez en 6 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 55

  1. Size before assembly: about 6.8 cm at the widest, 8.9 cm long; 29 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. Change to snow (pull it through on the last yarn-over of R5).
  4. Change to ink (pull it through on the last yarn-over of R7).
  5. Change to orange (pull it through on the last yarn-over of R8).
  6. Change to ink (pull it through on the last yarn-over of R12).
  7. Change to snow (pull it through on the last yarn-over of R13).
  8. Change to ink (pull it through on the last yarn-over of R16).
  9. Change to orange (pull it through on the last yarn-over of R17).
  10. Change to ink (pull it through on the last yarn-over of R20).
  11. Change to snow (pull it through on the last yarn-over of R21).
  12. Change to ink (pull it through on the last yarn-over of R23).
  13. Change to orange (pull it through on the last yarn-over of R24).
  14. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  15. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.9 cm at the widest, 2.7 cm long; 9 rounds.
  2. Change to ink (pull it through on the last yarn-over of R7).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 9 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
  2. Change to ink (pull it through on the last yarn-over of R6).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 5 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2 cm at the widest, 2.2 cm long; 7 rounds.
  2. Change to ink (pull it through on the last yarn-over of R5).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 14 mm (on the body): between rounds 26 and 27, 8 st apart (count along round 26: about 3.8 st each side of the centre top line).
  • Satin stitch (on the body): in mouth thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred between rounds 28 and 29, on the centre bottom line .

Body · R1–R5

MR×××××××V×V×V××V××

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done