amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Unimpressed Llama modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 85 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
17.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet llama pattern: a Unimpressed Llama amigurumi, about 17 cm tall in DK yarn with a 2.5 mm hook. This one is a tall cream llama with a long neck, a striped terracotta, mustard and teal saddle blanket and a flat, half-closed stare. You need about 100 m of yarn: 65 m cream, 5 m terracotta, 5 m teal, 5 m mustard, 5 m brown, 5 m ivory, 5 m coral and 5 m rose. Plan on roughly 3 hours. It makes a funny desk buddy or a gift for anyone who has a sarcastic side or loves llamas. You can spin the 3D model and follow the round-by-round pattern.

Comment crocheter Unimpressed Llama

Intermédiaire · 17 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 13 pièces en rangs : Body, Head and neck, Muzzle, Top fluff, Ear ×2, Leg ×4, Tail, Cheek ×2 (90 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 13 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 50

  1. Size before assembly: about 5.9 cm at the widest, 7.5 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.1 cm at the widest, 8.7 cm long; 26 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 2.1 × 1.3 cm at the widest, 2 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With ivory: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 1.8 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.1 cm at the widest, 2.6 cm long; 8 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy).
  2. Change to cream (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.9 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 21 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Of these: front — 2 (left and right); hind — 2 (left and right). Size before assembly: about 1.6 cm at the widest, 4.1 cm long; 12 rounds.
  2. Change to cream (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Satin stitch (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in ink thread, a oval about 2.6 mm wide and 3.4 mm tall, horizontal stitches, turned 25° clockwise (looking at that surface); centred between rounds 1 and 2, 0.5 st from the centre top line, toward the toy's left .
  • Embroidery in ink thread (on the muzzle), straight stitches through: (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the head and neck) (2, symmetric: the toy's left side is described, the right is its mirror image): in ink thread, a oval about 9 mm wide and 6 mm tall, horizontal stitches; centred in round 6, 3 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head and neck) (2, symmetric: the toy's left side is described, the right is its mirror image): in cream thread, a oval about 10.5 mm wide and 3.4 mm tall, horizontal stitches; centred between rounds 5 and 6, 3 st from the centre front line, toward the toy's left .
  • Embroidery in ink thread (on the head and neck) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 4 and 5, 1.5 st from the centre front line, toward the toy's left ) → (in round 5, 3 st from the centre front line, toward the toy's left ) → (in round 5, 4 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done