amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Ghost in a Mouse Costume modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 84 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
2/3
Temps
~3 h
Taille
15.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A crochet amigurumi inspired by Mimikyu from Pokémon: a little ghost hiding under a yellow cloth costume with a drawn-on face and a bent ear. About 15 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Pokémon.

Comment crocheter Ghost in a Mouse Costume

Intermédiaire · 15 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 7 pièces en rangs : Body in costume, Ragged hem, Ear, Bent ear, Claw ×2, Stick tail (87 rangs au total).
  2. Rembourrez et assemblez en 6 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 8 prêts

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixCrocheter

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 64

  1. Size before assembly: about 8.1 cm at the widest, 10.9 cm long; 38 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 9.1 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  2. Change to cloth (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 3 cm at the widest, 5.2 cm long; 15 rounds.
  2. Change to cloth (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.2 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) --> Bend ≈ 110° around round 7<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 7, 2.5 st from the centre front line, toward the toy's left <!-- st 2.71 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. Size before assembly: about 0.8 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.7 cm at the widest, 3.9 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 6<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 0.5 st from the centre top line, toward the toy's left <!-- st 0.37 left -->). On the inner side draw rounds 6 and 7 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's left ) → (in round 26, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's left ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 28 and 29, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ) → (between rounds 26 and 27, 3.5 st from the centre front line, toward the toy's right ) → (in round 26, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 28 and 29, 3 st from the centre front line, toward the toy's right ) → (between rounds 27 and 28, 4 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the body in costume), straight stitches through: (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 24 and 25, 1 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, on the centre front line ) → (between rounds 24 and 25, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 23 and 24, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 24 and 25, 2.5 st from the centre front line, toward the toy's left ).
  • Felt (cheek), 2 ovals 9×9 mm (on the body in costume) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 25, 6 st from the centre front line, toward the toy's left.

Body in costume · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done