amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Axolotl in a Santa Hat Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 45 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
7.5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet axolotl pattern for a round pink ornament in a tiny Santa hat, made to hang on the tree. This amigurumi axolotl has feathery raspberry gills, rosy cheeks and a soft smile, with a white pompom and a gold loop on top. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, ends up about 7.5 cm (3 in) tall, and has safety eyes with a glint (embroider them for small children); the gills, paws and tail are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Comment crocheter Axolotl in a Santa Hat Ornament

Pour débutants · 8 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 15 pièces en rangs : Head-body ball, Gill ×6, Cheek ×2, Paw ×2, Tail, Santa hat, Pompom, Hanging loop (55 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 49

  1. Size before assembly: about 4.3 cm at the widest, 3.6 cm long; 19 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 2 (left and right); mid — 2 (left and right); low — 2 (left and right). Size before assembly: about 0.7 cm at the widest, 1.8 cm long; 7 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 3 stitches of the last round, pull tight and hide the end inside. Bend ≈ 35° around round 4<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 4, 1.5 st from the centre front line, toward the toy's right <!-- st 1.63 right -->). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together.

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 0.8 cm at the widest, 1.3 cm long; 5 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3 cm at the widest, 2.2 cm long; 10 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R7).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 30° around round 5<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 5, on the centre back line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.4 cm at the widest, 1.7 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 6 mm (on the head-body ball): between rounds 11 and 12, 8 st apart (count along round 11: about 4.2 st each side of the centre front line).
  • Embroidery in plum thread (on the head-body ball), straight stitches through: (between rounds 11 and 12, 2 st from the centre front line, toward the toy's right ) → (in round 11, 1 st from the centre front line, toward the toy's right ) → (in round 11, 0.5 st from the centre front line, toward the toy's right ) → (in round 11, on the centre front line ) → (in round 11, 0.5 st from the centre front line, toward the toy's left ) → (in round 11, 1 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 2 st from the centre front line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done