amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Axolotl in a Santa Hat Ornament receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 45 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
1/3
Tempo
~2 h
Tamanho
7.5 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet axolotl pattern for a round pink ornament in a tiny Santa hat, made to hang on the tree. This amigurumi axolotl has feathery raspberry gills, rosy cheeks and a soft smile, with a white pompom and a gold loop on top. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, ends up about 7.5 cm (3 in) tall, and has safety eyes with a glint (embroider them for small children); the gills, paws and tail are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Como fazer Axolotl in a Santa Hat Ornament de crochê

Para iniciantes · 8 cm de altura · cerca de 2 h · fio fingering · agulha de 2 mm

  1. Faça as 15 partes em carreiras: Head-body ball, Gill ×6, Cheek ×2, Paw ×2, Tail, Santa hat, Pompom, Hanging loop (55 carreiras no total).
  2. Encha e monte em 10 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 11 separados

Mais como este

Todas as receitas de amigurumi axolote →Tudo em animais →
  • Prévia de Winnie-the-Pooh with a Honey Pot
    Gerador
    FazerRemix

    Winnie-the-Pooh with a Honey Pot

    pelo gerador de receitas

RemixFazer

Amostra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 49 carreiras feitas

  1. Size before assembly: about 4.3 cm at the widest, 3.6 cm long; 19 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 2 (left and right); mid — 2 (left and right); low — 2 (left and right). Size before assembly: about 0.7 cm at the widest, 1.8 cm long; 7 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 3 stitches of the last round, pull tight and hide the end inside. Bend ≈ 35° around round 4<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 4, 1.5 st from the centre front line, toward the toy's right <!-- st 1.63 right -->). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together.

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 0.8 cm at the widest, 1.3 cm long; 5 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 4 mm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3 cm at the widest, 2.2 cm long; 10 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R7).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 30° around round 5<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 5, on the centre back line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.4 cm at the widest, 1.7 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 6 mm (on the head-body ball): between rounds 11 and 12, 8 st apart (count along round 11: about 4.2 st each side of the centre front line).
  • Embroidery in plum thread (on the head-body ball), straight stitches through: (between rounds 11 and 12, 2 st from the centre front line, toward the toy's right ) → (in round 11, 1 st from the centre front line, toward the toy's right ) → (in round 11, 0.5 st from the centre front line, toward the toy's right ) → (in round 11, on the centre front line ) → (in round 11, 0.5 st from the centre front line, toward the toy's left ) → (in round 11, 1 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 2 st from the centre front line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Tigger the Bouncy Tiger
    Gerador
    FazerRemix

    Tigger the Bouncy Tiger

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Speedy Blue Hedgehog
    Gerador
    FazerRemix

    Speedy Blue Hedgehog

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de White Beagle with Black Ears
    Gerador
    FazerRemix

    White Beagle with Black Ears

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Grey Tabby Loaf Cat
    Gerador
    FazerRemix

    Grey Tabby Loaf Cat

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Confused Yellow Duck
    Gerador
    FazerRemix

    Confused Yellow Duck

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Pudding Puppy in a Beret
    Gerador
    FazerRemix

    Pudding Puppy in a Beret

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Electric Yellow Mouse
    Gerador
    FazerRemix

    Electric Yellow Mouse

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Piglet in a Green Jumper
    Gerador
    FazerRemix

    Piglet in a Green Jumper

    pelo gerador de receitas

    Dificuldade
    1/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Peter Rabbit in a Blue Jacket
    Gerador
    FazerRemix

    Peter Rabbit in a Blue Jacket

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Bunny in a Pink Hood
    Gerador
    FazerRemix

    Bunny in a Pink Hood

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • Prévia de Simple White Bunny in a Dress
    Gerador
    FazerRemix

    Simple White Bunny in a Dress

    pelo gerador de receitas

    Dificuldade
    2/3
    Esquisitice
    1/5
    Vezes feito
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done