amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Puppy with Reindeer Antlers Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 70 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~2 h
Taille
7.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet Christmas dog pattern for a round cream puppy with floppy brown ears, a red nose and a reindeer antler headband. This amigurumi puppy winks with one eye, wears a brown patch on the other, sticks out a tiny pink tongue and has a green collar. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and is about 7.4 cm (3 in) tall; the face is embroidered, and the ears, nose, antlers, paws and loop are sewn on, with a red chain headband across the head. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

Comment crocheter Puppy with Reindeer Antlers Ornament

Intermédiaire · 7 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 14 pièces en rangs : Head-body ball, Muzzle, Red nose, Eye patch, Floppy ear ×2, Antler ×2, Antler tine ×2, Paw ×2, Green collar, Hanging loop (70 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 58

  1. Size before assembly: about 5.4 cm at the widest, 5.4 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 1.9 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With snow white: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.8 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.5 cm at the widest, 3 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 25 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 11<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 11, 1 st from the centre bottom line, toward the back <!-- st 0.95 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. Size before assembly: about 0.7 cm at the widest, 2.6 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 25° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 5, on the centre front line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together. Bend the second piece as a mirror image.

  1. Size before assembly: about 0.5 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 4.2 cm at the widest, 0.8 cm long; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the head-body ball): in black thread, a oval about 5.4 mm wide and 6.6 mm tall, horizontal stitches; centred between rounds 16 and 17, 4.5 st from the centre front line, toward the toy's right .
  • Eye glint (on the head-body ball): in snow white thread over the embroidered eye, a oval about 1.8 mm wide and 1.8 mm tall, horizontal stitches; centred between rounds 16 and 17, 4.5 st from the centre front line, toward the toy's right , then moved 1 mm to the right and 1.6 mm up (looking at the toy's face).
  • Strap (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): with bright red, ch 17 (≈ 3.8 cm); for a firmer strap sl st back along it. Sew it along (between rounds 16 and 17, 13 st from the centre front line, toward the toy's left ) → (in round 20, 8 st from the centre front line, toward the toy's left ) → (in round 23, 3.5 st from the centre front line, toward the toy's left ) → (in round 25, 0.5 st from the centre front line, toward the toy's left ) → (in round 26, on the centre front line), catching it every 2–3 ch.
  • Embroidery in black thread (on the head-body ball), straight stitches through: (in round 16, 3 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 4 st from the centre front line, toward the toy's left ) → (in round 17, 5 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 5.5 st from the centre front line, toward the toy's left ) → (in round 16, 6.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 5 mm wide and 6 mm tall, horizontal stitches; centred in round 2, on the centre bottom line.
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done