amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Round Santa Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 72 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
2/3
Temps
~2 h
Taille
9.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet santa ornament pattern: a Round Santa Ornament amigurumi, about 9 cm tall in fingering yarn with a 2 mm hook. A ball-shaped Santa head with a fluffy white beard, rosy cheeks and a red hat with a white brim and pom-pom, finished with a gold hanging loop. You need about 70 m of yarn: 35 m white, 20 m red, 5 m peach, 5 m gold and 5 m rose. Plan on roughly 2 hours. Hang it on the Christmas tree, tie it to a gift or give it as a small stocking filler. The 3D model spins so you can check every side, and the pattern goes round by round.

Comment crocheter Round Santa Ornament

Intermédiaire · 9 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 10 pièces en rangs : Head ball, Hat, Pom-pom, Beard, Moustache half ×2, Nose, Eyebrow ×2, Hanging loop (72 rangs au total).
  2. Rembourrez et assemblez en 8 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 68

  1. Size before assembly: about 6.8 cm at the widest, 5.2 cm long; 29 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to white (pull it through on the last yarn-over of R18).
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.4 cm at the widest, 2.5 cm long; 13 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 5<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 7 st from the centre front line, toward the toy's right <!-- st 6.75 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 2 to round 7, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. Size before assembly: about 1.7 cm at the widest, 1.4 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 7.7 × 5 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 11.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 2.5 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest, 1.3 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 1.7 × 1.1 cm; 2 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.9 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 20 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head ball): in round 15, 10 st apart (count along round 15: about 4.8 st each side of the centre front line).
  • Strap (on the head ball): with white, ch 86 (≈ 19.3 cm); for a firmer strap sl st back along it. Sew it along (between rounds 11 and 12, on the centre back line ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, on the centre front line ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, on the centre back line ), catching it every 2–3 ch.
  • Blush about 9 mm, dry pastel or blush (on the head ball, both sides): between rounds 16 and 17, 7.5 st from the centre front line, toward the toy's left . Colour pink.

Head ball · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done