amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Strawberry Cow Keychain modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 47 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet strawberry cow pattern: a Strawberry Cow Keychain amigurumi, about 5 cm tall in fingering yarn with a 2.0 mm hook. A tiny pink cow with raspberry strawberry spots, little ivory horns, a pale muzzle and a green leafy loop on top for your keys. You need about 50 m of yarn: 20 m pink, 5 m green, 5 m cream, 5 m ivory, 5 m raspberry, 5 m coral and 5 m salmon. Plan on roughly 2 hours. Clip it to a bag, a zipper or a set of keys, or hang it on a tree as a small ornament. You can spin the 3D model and follow the round-by-round pattern.

Comment crocheter Strawberry Cow Keychain

Pour débutants · 5 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 11 pièces en rangs : Head ball, Muzzle, Horn ×2, Ear ×2, Cheek ×2, Hoof foot ×2, Strawberry leaves (49 rangs au total).
  2. Rembourrez et assemblez en 8 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 43

  1. Size before assembly: about 4.9 cm at the widest, 3.7 cm long; 21 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3.2 × 2.3 cm at the widest, 1.2 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.7 cm at the widest, 1.8 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.7 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to pink (pull it through on the last yarn-over of R6).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.4 mm deep in front, a rounded back; about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 0.9 cm long; 4 rounds.
  2. Change to pink (pull it through on the last yarn-over of R2).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Flat motif — star (worked in rounds, one layer of fabric), about 3 × 3.2 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Embroidery in chocolate thread (on the muzzle), straight stitches through: (in round 1, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 1 and 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 1 and 2, on the centre bottom line ) → (between rounds 1 and 2, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 1, 1.5 st from the centre bottom line, toward the toy's right ).
  • Safety eyes with a printed glint 6 mm (on the head ball): in round 14, 8 st apart (count along round 14: about 4 st each side of the centre front line).
  • Satin stitch (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in raspberry thread, a oval about 3 mm wide and 2.2 mm tall, horizontal stitches, turned 25° clockwise (looking at that surface); centred in round 3, 3 st from the centre top line, toward the toy's left .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 10, 14.5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 12, 16 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred between rounds 12 and 13, 14 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 19, 2.5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred between rounds 20 and 21, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 20, 1.5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 5, on the centre back line.
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred in round 6, 1.5 st from the centre back line, toward the toy's right .

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
  • Satin stitch (on the head ball): in seed thread, a oval about 1.6 mm wide and 2.2 mm tall, horizontal stitches; centred between rounds 6 and 7, 1 st from the centre back line, toward the toy's left .