amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Worry Worm with a Mustache modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 49 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
4.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet worry worm pattern: a Worry Worm with a Mustache amigurumi, about 5 cm tall in DK yarn with a 2.5 mm hook. It is a soft green striped worm with a worried little face, slanted brows, rosy cheeks and a big curly chocolate-brown mustache. You need about 35 m of yarn: 15 m lime, 10 m light green, 5 m cocoa and 5 m blush pink. Plan on roughly 1 hour. A pocket-sized worry worm makes a sweet desk buddy or a gift for a friend who needs a smile. Spin the 3D model to see the curled mustache from every side, then follow the round-by-round pattern.

Comment crocheter Worry Worm with a Mustache

Pour débutants · 5 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 5 pièces en rangs : Worm body, Cheek ×2, Mustache half ×2 (49 rangs au total).
  2. Rembourrez et assemblez en 5 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 38

  1. Size before assembly: about 4.6 cm at the widest, 12.4 cm long; 36 rounds.
  2. Change to light green (pull it through on the last yarn-over of R12).
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Change to lime (pull it through on the last yarn-over of R15).
  5. Change to light green (pull it through on the last yarn-over of R19).
  6. Change to lime (pull it through on the last yarn-over of R23).
  7. Change to light green (pull it through on the last yarn-over of R27).
  8. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Bend ≈ 230° around round 14<!-- the bend spreads over 3 rounds --><!-- coil 2 pitch 14 -->. The piece rolls up into a spiral (about 0.6 turns) from round 14 to its end: after stuffing, roll it up starting from the last round (round 36) toward the side that faces toward the toy's left on the finished toy; the turns lie close, each wider than the last. From the last round back to round 14 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 3.8 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 190° around round 5<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 5, 1.5 st from the centre front line, upward <!-- st 1.66 up -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 3 to round 7, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 8 mm (on the worm body): in round 4, 2 st from the line on the toy's left side, upward .
  • Safety eye with a printed glint 8 mm (on the worm body): in round 4, 2 st from the line on the toy's right side, upward .
  • Embroidery in dark thread (on the worm body), straight stitches through: (in round 4, 3.5 st from the line on the toy's left side, upward ) → (in round 4, 2.5 st from the line on the toy's left side, upward ) → (in round 5, 2.5 st from the line on the toy's left side, upward ).
  • Embroidery in dark thread (on the worm body), straight stitches through: (in round 4, 3.5 st from the line on the toy's right side, upward ) → (in round 4, 2.5 st from the line on the toy's right side, upward ) → (in round 5, 2.5 st from the line on the toy's right side, upward ).
  • Embroidery in dark thread (on the worm body), straight stitches through: (in round 5, 6.5 st from the line on the toy's left side, downward ) → (between rounds 5 and 6, 7 st from the line on the toy's left side, downward ) → (in round 5, 7.5 st from the line on the toy's left side, downward ) → (between rounds 5 and 6, 8 st from the line on the toy's left side, downward ) → (in round 5, 9 st from the line on the toy's left side, downward ) → (between rounds 5 and 6, 9.5 st from the line on the toy's left side, downward ).

Worm body · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done