amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Bat in a Santa Hat Ornament crochet pattern

  • Mathematically BalancedChecked by script: in all 44 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
1/3
Time
~2 h
Size
10.8 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet bat ornament pattern: a Bat in a Santa Hat Ornament amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. It is a round black bat with big white eyes, tiny fangs, pink inner ears, spread dark grey wings and a little red Santa hat with a white pompom that carries the hanging loop. You need about 70 m of yarn: 30 m black, 10 m dark grey, 10 m red, 10 m white, 5 m pink and 5 m light pink. Plan on roughly 2 hours. A great ornament for spooky-cute Christmas trees and for friends who love both bats and holidays. It also works as a small desk decoration. Rotate the 3D model to see the wings and hat, and follow the round-by-round pattern.

How to crochet the Bat in a Santa Hat Ornament

Beginner-friendly · 11 cm tall · about 2 h · DK yarn · 2.5 mm hook

  1. Crochet the 10 pieces in rounds: Body, Ear ×2, Wing ×2, Santa hat, Pompom, Cheek ×2, Hanging loop (67 rounds in all).
  2. Stuff and put it together in 7 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 11 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 60 rounds done

  1. Size before assembly: about 6.6 cm at the widest, 5.4 cm long; 22 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 4.1 cm long; 12 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 4.1 × 7.8 cm; 9 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 3.1 cm at the widest, 4.8 cm long; 14 rounds.
  2. Change to white (pull it through on the last yarn-over of R11).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 115° around round 7<!-- the bend spreads over 5 rounds -->. Bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 7, 4.5 st from the centre front line, toward the toy's right <!-- st 4.65 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 0.9 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 15×15 mm (on the body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 12, 3.5 st from the centre front line, toward the toy's left .
  • Safety eyes with a printed glint 10 mm (on the body): between rounds 12 and 13, 7 st apart (count along round 12: about 3.5 st each side of the centre front line).
  • Embroidery in pink thread (on the body), straight stitches through: (in round 13, 2 st from the centre front line, toward the toy's right ) → (in round 14, 1 st from the centre front line, toward the toy's right ) → (in round 14, on the centre front line) → (in round 14, 1 st from the centre front line, toward the toy's left ) → (in round 13, 2 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body): in white thread, a triangle about 3.4 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 14 and 15, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the body): in white thread, a triangle about 3.4 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 14 and 15, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done