amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Plants

Heart with Legs crochet pattern

  • Mathematically BalancedChecked by script: in all 79 rounds the increases and decreases add up to the stitch count.

by the pattern enginePlants

Difficulty
2/3
Time
~3 h
Size
11.1 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet heart pattern: a Heart with Legs amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. It is a puffy red heart with a shy face, small arms, long thin dark red legs stretched out in front and white sneakers with grey soles. You need about 85 m of yarn: 55 m red, 15 m dark red, 5 m white, 5 m grey and 5 m pink. Plan on roughly 3 hours. It is a sweet Valentine or friendship gift, and the long legs let it sit on a shelf or desk edge. You can spin the 3D model and follow the round-by-round pattern.

How to crochet the Heart with Legs

Intermediate · 11 cm tall · about 3 h · DK yarn · 2.5 mm hook

  1. Crochet the 9 pieces in rounds: Heart, Heart lobe ×2, Arm ×2, Cheek ×2, Long leg ×2 (79 rounds in all).
  2. Stuff and put it together in 5 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 10 gathered

Gauge

RemixCrochet it

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 49 rounds done

  1. Size before assembly: about 7.8 cm at the widest, 7.3 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5.5 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 3.7 cm thick (oval cross-section).<!-- press the piece flat by 22 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 3.2 × 2 cm at the widest, 10.8 cm long; 31 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With grey: ch 5.
  3. Change to white (pull it through on the last yarn-over of R2).
  4. Change to dark red (pull it through on the last yarn-over of R6).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the heart): in round 19, 8 st apart (count along round 19: about 4 st each side of the centre front line).
  • Satin stitch (on the heart): in dark brown thread, a oval about 5 mm wide and 3 mm tall, horizontal stitches; centred in round 17, on the centre front line.
  • Satin stitch (on the right heart lobe): in light pink thread, a oval about 8 mm wide and 3.6 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 8, 3.5 st from the centre front line, toward the toy's left.
  • Embroidery in dark brown thread (on the heart) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 22 and 23, 5 st from the centre front line, toward the toy's right ) → (in round 22, 4 st from the centre front line, toward the toy's right) → (between rounds 21 and 22, 3 st from the centre front line, toward the toy's right ).

Abbreviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern