amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Bashful Long-Ear Bunny crochet pattern

  • Mathematically BalancedChecked by script: in all 125 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~4 h
Size
14.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A free crochet bunny pattern for a tall, soft, bashful bunny in oatmeal beige with very long floppy ears that reach down to its feet. This amigurumi bunny has a small face set low on a round head, tiny dangly legs, slim arms and a little cream pompom tail, all in muted tones for a gentle plush look. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, stands about 14 cm (5.7 in) tall and has 9 mm safety eyes, with the ears and limbs sewn on at the end. The page has the full row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

How to crochet the Bashful Long-Ear Bunny

Advanced · 14 cm tall · about 4 h · DK yarn · 2.5 mm hook

  1. Crochet the 11 pieces in rounds: Body, Head, Ear ×2, Cheek ×2, Arm ×2, Leg ×2, Pompom tail (125 rounds in all).
  2. Stuff and put it together in 7 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 8 gathered

Gauge

RemixCrochet it

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 81 rounds done

  1. Size before assembly: about 6.6 cm at the widest, 7.2 cm long; 23 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.6 cm at the widest, 14 cm long; 40 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.8 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 30<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 3 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 30, 1 st from the centre bottom line, toward the back). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.3 cm at the widest, 3.8 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.8 cm at the widest, 4.8 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3 cm at the widest, 2.1 cm long; 9 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the head): between rounds 14 and 15, 9 st apart (count along round 14: about 4.5 st each side of the centre front line).
  • Satin stitch (on the head): in dusty pink thread, a triangle about 6 mm wide and 4.2 mm tall, horizontal stitches; centred in round 16, on the centre front line .
  • Embroidery in cocoa thread (on the head), straight stitches through: (in round 16, on the centre front line) → (in round 17, on the centre front line ).
  • Embroidery in cocoa thread (on the head), straight stitches through: (in round 17, on the centre front line ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's right ) → (in round 17, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in cocoa thread (on the head), straight stitches through: (in round 17, on the centre front line ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's left ) → (in round 17, 2 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done