amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Lamb with a Daisy and a Bee crochet pattern

  • Mathematically BalancedChecked by script: in all 93 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~6 h
Size
13.4 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet lamb pattern: a Lamb with a Daisy and a Bee amigurumi, about 13 cm tall in DK yarn with a 2.5 mm hook. A dark-faced lamb with a cream bobble wool body holds a white daisy in its mouth while a tiny striped bee sits on its head. You need about 180 m of yarn: 100 m cream, 45 m cocoa, 5 m white, 5 m green, 5 m light grey, 5 m yellow, 5 m pink, 5 m black and 5 m gold. Plan on roughly 6 hours. Give it as a spring gift for a garden lover, or keep it as a cheerful desk buddy. You can spin the 3D model and follow the round-by-round pattern.

How to crochet the Lamb with a Daisy and a Bee

Advanced · 13 cm tall · about 6 h · DK yarn · 2.5 mm hook

  1. Crochet the 88 pieces in rounds: Body, Head, Floppy ear ×2, Leg with hoof ×2, Daisy, Daisy centre, Bee, Bee wing ×2, Arm ×2, Cheek ×2, Wool curl ×73 (95 rounds in all).
  2. Stuff and put it together in 13 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 14 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 74 rounds done

  21. Size before assembly: about 7.4 cm at the widest, 6.3 cm long; 25 rounds.
  22. → Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  21. Size before assembly: about 7.5 cm at the widest, 6.2 cm long; 25 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 2.7 cm at the widest, 3.2 cm long; 10 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.5 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 27 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  9. Size before assembly: about 3.2 cm at the widest, 3 cm long; 10 rounds.
  10. Change to cream (pull it through on the last yarn-over of R5).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. Flat motif — lobed (lobes round a magic ring, worked in rounds, one layer of fabric), about 2.8 × 2.8 cm; 2 rows.
  4. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  2. A flat circle about 0.8 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Size before assembly: about 1.3 cm at the widest, 1.9 cm long; 6 rounds.
  7. Change to black (pull it through on the last yarn-over of R2).
  8. Change to yellow (pull it through on the last yarn-over of R3).
  9. → Start stuffing (lightly) and keep adding as you decrease.
  10. Change to black (pull it through on the last yarn-over of R5).
  11. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  4. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 80 % -->

  5. Size before assembly: about 1.2 cm at the widest, 3.1 cm long; 9 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Of these: on the body — 56 (24 pairs, left and right, and 8 single); on the head — 17 (8 pairs, left and right, and 1 single). A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 15×15 mm (on the head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 10, 4 st from the centre front line, toward the toy's left .
  • Safety eyes with a printed glint 8 mm (on the head): in round 10, 7 st apart (count along round 10: about 3.3 st each side of the centre front line).
  • Satin stitch (on the head): in pink thread, a oval about 8 mm wide and 5 mm tall, horizontal stitches; centred in round 12, on the centre front line .
  • Embroidery in pink thread (on the head), straight stitches through: (between rounds 13 and 14, on the centre front line ) → (between rounds 14 and 15, 1 st from the centre front line, toward the toy's right ) → (in round 14, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in pink thread (on the head), straight stitches through: (between rounds 13 and 14, on the centre front line ) → (between rounds 14 and 15, 1 st from the centre front line, toward the toy's left ) → (in round 14, 2 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done