amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Fantasy

Santa Belly Ornament crochet pattern

  • Mathematically BalancedChecked by script: in all 111 rounds the increases and decreases add up to the stitch count.

by the pattern engineFantasy

Difficulty
3/3
Time
~4 h
Size
13.5 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet santa pattern: a Santa Belly Ornament amigurumi, about 14 cm tall in fingering yarn with a 2.0 mm hook. It is a round Santa with a huge red belly, a black belt with a gold buckle, a white beard, tiny black boots and a gold loop on his hat. You need about 110 m of yarn: 50 m red, 35 m white, 10 m black, 5 m peach, 5 m gold and 5 m rose. Plan on roughly 4 hours. Hang him on the tree or give him as a stocking filler for anyone who loves Santa. You can rotate the 3D model and work through the pattern round by round.

How to crochet the Santa Belly Ornament

Advanced · 14 cm tall · about 4 h · fingering yarn · 2 mm hook

  1. Crochet the 13 pieces in rounds: Body (coat), Head, Hat, Pom-pom, Beard, Moustache half ×2, Nose, Eyebrow ×2, Boot ×2, Hanging loop (111 rounds in all).
  2. Stuff and put it together in 11 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 11 gathered

RemixCrochet it

Gauge

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 103 rounds done

  1. Size before assembly: about 7.9 cm at the widest, 6 cm long; 28 rounds.
  2. Change to black (pull it through on the last yarn-over of R16).
  3. Change to red (pull it through on the last yarn-over of R18).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 6.8 cm at the widest, 5.2 cm long; 29 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to white (pull it through on the last yarn-over of R18).
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.4 cm at the widest, 4.7 cm long; 20 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 110° around round 8<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 8, 3.5 st from the centre front line, toward the toy's right <!-- st 3.38 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 6 to round 10, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.2 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 7.7 × 5 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 11.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 2.5 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest, 1.3 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 1.7 × 1.1 cm; 2 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1.9 × 1.6 cm at the widest, 1.4 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With black: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.9 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 20 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head): in round 15, 10 st apart (count along round 15: about 4.8 st each side of the centre front line).
  • Strap (on the head): with white, ch 86 (≈ 19.3 cm); for a firmer strap sl st back along it. Sew it along (between rounds 11 and 12, on the centre back line ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, on the centre front line ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, on the centre back line ), catching it every 2–3 ch.
  • Blush about 9 mm, dry pastel or blush (on the head, both sides): between rounds 16 and 17, 7.5 st from the centre front line, toward the toy's left . Colour pink.

Body (coat) · R1–R5

MR××××××VVVVVV×V×V×

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done