amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Penguin Family with Chick in a Hat crochet pattern

  • Mathematically BalancedChecked by script: in all 122 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~5 h
Size
8.7 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

Free crochet penguin pattern: a Penguin Family with Chick in a Hat amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. The toy is two emperor penguins with golden cheek patches standing close together, and a grey chick in a red striped hat snuggling against the bigger one. You need about 135 m of yarn: 55 m charcoal, 25 m white, 20 m grey, 10 m orange, 10 m red, 5 m pink, 5 m golden yellow and 5 m pale yellow. Plan on roughly 4 hours. A warm family gift, a cute winter shelf group or a charming set for a nursery. You can spin the 3D model and follow the round-by-round pattern.

How to crochet the Penguin Family with Chick in a Hat

Advanced · 9 cm tall · about 5 h · DK yarn · 2.5 mm hook

  1. Crochet the 24 pieces in rounds: Father penguin, Beak ×2, Flipper ×2, Foot ×4, Cheek ×4, Mother penguin, Chick, Chick beak, Chick flipper ×2, Chick foot ×2, Chick cheek ×2, Knitted chick hat, Pompom (122 rounds in all).
  2. Stuff and put it together in 17 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 13 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 109 rounds done

  1. Size before assembly: about 9.4 cm at the widest, 8.5 cm long; 33 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in white, 3 sc in charcoal, 2 sc in white
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: on the father penguin — 1; on the mother penguin — 1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %).

  1. Of these: on the father penguin — 1; on the mother penguin — 1. Size before assembly: about 1.1 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 80 % -->

  1. Size before assembly: about 1.4 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 60 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 7.6 cm at the widest, 6.9 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in white, 3 sc in charcoal, 2 sc in white
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.8 cm at the widest, 5.1 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.8 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %).

  1. Size before assembly: about 0.8 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 80 % -->

  1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 60 % -->

  1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 4.1 cm at the widest, 2.7 cm long; 10 rounds.
  2. Change to white (pull it through on the last yarn-over of R4).
  3. Change to red (pull it through on the last yarn-over of R6).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.4 cm at the widest, 1.2 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the father penguin): between rounds 21 and 22, 10 st apart (count along round 21: about 4.8 st each side of the centre front line).
  • Safety eyes with a printed glint 10 mm (on the mother penguin): between rounds 19 and 20, 7 st apart (count along round 19: about 3.5 st each side of the centre front line).
  • Safety eyes with a printed glint 8 mm (on the chick): in round 14, 6 st apart (count along round 14: about 2.8 st each side of the centre front line).

Abbreviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern