amigurumi
  • Catalog
  • Workspace
Create
amigurumi
  • Catalog
  • Patterns by animal
  • About
  • Help
  • ChatGPT & Claude app
  • Terms
  • Privacy

Zero-math, zero-confusion patterns. Powered by geometric AI modeling. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalog / Animals

Long-Legged Bunny in a Dress crochet pattern

  • Mathematically BalancedChecked by script: in all 143 rounds the increases and decreases add up to the stitch count.

by the pattern engineAnimals

Difficulty
3/3
Time
~4 h
Size
19.3 cm
Weirdness
1/5
Crochet itRemix this toy
Download Free Printable PDF

A4 PDF: materials, every round with a tick box, assembly and face

A free tilda bunny pattern for a slim cream amigurumi bunny with long ears, long legs and a sage-green dress. One ear flops over at the tip, and this bunny plushie wears a dress with a pink heart, a white ruffled collar and a scalloped hem, its legs bending softly at the knee into little pink shoes. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 19 cm (7.5 in) tall; the dress and collar are separate pieces slipped over the body, the arms are sewn onto the dress, and the eyes are safety eyes. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece.

How to crochet the Long-Legged Bunny in a Dress

Advanced · 19 cm tall · about 4 h · DK yarn · 2.5 mm hook

  1. Crochet the 14 pieces in rounds: Body, Dress, Collar, Head, Ear, Bent ear, Arm ×2, Leg ×2, Pompom tail, Cheek ×2, Heart (161 rounds in all).
  2. Stuff and put it together in 11 steps; each one lights up where it goes on the 3D model.
  3. Add the face: safety eyes by round and stitch, or embroider them for a child under 3.

Every round with its stitch count is in the Pattern tab below, and in the free printable PDF.

What you'll need

Tick things off as you gather them.

0 of 11 gathered

RemixCrochet it

Gauge

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Worked in

Continuous spiral rounds. Don't join. Move a stitch marker up every round.

Parts

Pattern languageenrudefrDownload Free Printable PDFPDF
0 of 92 rounds done

  1. Size before assembly: about 5 cm at the widest, 9.3 cm long; 27 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.3 cm at the widest, 4.5 cm long; 14 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R12).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.2 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 6.4 cm at the widest, 4.6 cm long; 20 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.6 cm at the widest, 7 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.7 mm deep in front, a rounded back; about 26 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) -->

  1. Size before assembly: about 2.6 cm at the widest, 7 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.7 mm deep in front, a rounded back; about 26 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) --> Bend ≈ 55° around round 13<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 13, 3.5 st from the centre front line, toward the toy's right <!-- st 3.51 right -->). On the inner side draw rounds 12 and 15 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 7.9 cm long; 22 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 9<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 9, on the centre front line <!-- st 0.23 right -->). On the inner side draw rounds 8 and 10 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 9.5 cm long; 27 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With dusty pink: ch 4.
  3. Change to snow white (pull it through on the last yarn-over of R5).
  4. Change to cream (pull it through on the last yarn-over of R7).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 14<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 14, on the centre bottom line <!-- st 0.08 right -->). On the inner side draw rounds 13 and 15 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — heart (worked in rounds, one layer of fabric), about 2.1 × 2 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the head): between rounds 11 and 12, 7 st apart (count along round 11: about 3.5 st each side of the centre front line).
  • Satin stitch (on the head): in rose pink thread, a triangle about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 13 and 14, on the centre front line .
  • Embroidery in dark brown thread (on the head), straight stitches through: (in round 14, on the centre front line) → (between rounds 14 and 15, on the centre front line ).
  • Embroidery in dark brown thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (in round 15, 0.5 st from the centre front line, toward the toy's left ) → (in round 15, 1 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nobody has shown theirs yet. Be the first.

Sign in to show yours

No questions yet

Ask the first one — the author and the AI helper both read here.

    Make this toy yours

    Open it in the 3D editor: change the colours, the size of any piece, or ask the AI in words. Your version gets its own pattern.

    Try asking:

    • Recolour it in pastels
    • Make it chubbier
    • Add a little scarf
    Open in the 3D editorTurn a photo into a crochet pattern
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abbreviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done