amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Halloween Spider receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 67 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
2/3
Tempo
~3 h
Tamanho
11.7 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet spider pattern for a round black amigurumi spider with eight striped legs, big felt-backed eyes and a tiny purple witch hat. The legs have purple stripes and orange tips and bend at the knee, and this spider plushie smiles with two little white fangs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and stands about 12 cm (4.5 in) tall with the hat; the legs are lightly stuffed tubes and the brim starts from a chain ring. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where each leg goes.

Como fazer Halloween Spider de crochê

Intermediário · 12 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

  1. Faça as 13 partes em carreiras: Body, Leg ×8, Witch hat, Hat brim, Cheek ×2 (67 carreiras no total).
  2. Encha e monte em 8 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 11 separados

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 51 carreiras feitas

  1. Size before assembly: about 8.5 cm at the widest, 7.3 cm long; 29 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 6 cm long; 17 rounds.
  2. Change to spider (pull it through on the last yarn-over of R3).
  3. Change to purple (pull it through on the last yarn-over of R5).
  4. Change to spider (pull it through on the last yarn-over of R7).
  5. Change to purple (pull it through on the last yarn-over of R9).
  6. Change to spider (pull it through on the last yarn-over of R11).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8.5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 8, 2 st from the centre front line, downward <!-- st 2.07 down -->). On the inner side draw rounds 7 and 10 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 5.1 cm long; 15 rounds.
  2. Change to band (pull it through on the last yarn-over of R11).
  3. Change to hat (pull it through on the last yarn-over of R13).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 45° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 2.5 st from the centre front line, toward the toy's right <!-- st 2.27 right -->). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 5.9 cm at the widest, 1.1 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.9 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (felt), 2 ovals 20×21 mm (on the body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 15, 4 st from the centre front line, toward the toy's left.
  • Safety eyes with a printed glint 14 mm (on the body): between rounds 15 and 16, 8 st apart (count along round 15: about 4 st each side of the centre front line).
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, 1.5 st from the centre front line, toward the toy's right ) → (in round 19, 1 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line ) → (in round 19, 1 st from the centre front line, toward the toy's left ) → (in round 18, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done