amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Bunny Bauble Ornament receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 59 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
1/3
Tempo
~2 h
Tamanho
7.8 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet Christmas ornaments pattern for a round white amigurumi bunny bauble with long ears, a striped scarf and a golden cap. The pink-lined ears stand up beside the gold cap and loop, a little pompom tail sits at the back, and the red and green knit scarf adds the holiday touch to this bunny plushie. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and is about 7.8 cm (3 in) tall; the face is embroidered and the ears, cheeks, scarf, tail, cap and loop are sewn on. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece,.

Como fazer Bunny Bauble Ornament de crochê

Para iniciantes · 8 cm de altura · cerca de 2 h · fio fingering · agulha de 2 mm

  1. Faça as 9 partes em carreiras: Head-body ball, Long ear ×2, Cheek ×2, Pompom tail, Gold cap, Hanging loop, Striped scarf (59 carreiras no total).
  2. Encha e monte em 8 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 11 separados

RemixFazer

Amostra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 50 carreiras feitas

  1. Size before assembly: about 5.4 cm at the widest, 5.4 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 3.3 cm long; 13 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) -->

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.6 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. Size before assembly: about 5 cm at the widest, 1.1 cm long; 4 rounds.
  2. Change to holly green (pull it through on the last yarn-over of R1).
  3. Change to christmas red (pull it through on the last yarn-over of R3).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 5.4 mm wide and 6.6 mm tall, horizontal stitches; centred in round 16, 4.5 st from the centre front line, toward the toy's left .
  • Eye glint (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): in snow white thread over the embroidered eye, a oval about 1.8 mm wide and 1.8 mm tall, horizontal stitches; centred in round 16, 4.5 st from the centre front line, toward the toy's left , then moved 1 mm to the right and 1.6 mm up (looking at the toy's face).
  • Satin stitch (on the head-body ball): in blush pink thread, a triangle about 4.6 mm wide and 3.4 mm tall, horizontal stitches; centred between rounds 14 and 15, on the centre front line .
  • Embroidery in black thread (on the head-body ball), straight stitches through: (in round 14, on the centre front line ) → (between rounds 13 and 14, on the centre front line ).
  • Embroidery in black thread (on the head-body ball), straight stitches through: (between rounds 13 and 14, on the centre front line ) → (in round 13, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 13 and 14, 2.5 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the head-body ball), straight stitches through: (between rounds 13 and 14, on the centre front line ) → (in round 13, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, 2.5 st from the centre front line, toward the toy's right ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done