amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Hedgehog in a Santa Hat Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 57 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~2 Std.
Größe
9.3 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet Christmas ornaments pattern for a round hazel-brown hedgehog in a red Santa hat with a pompom and a golden hanging loop. This amigurumi hedgehog has a cream face, a dark little nose, round ears and a back covered in short yarn fringe quills that make it look spiky and soft at once. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 9.3 cm (3.7 in) tall with the hat; the eyes are embroidered, the face, snout, ears, feet and hat are sewn on and the quills are knotted in. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

Hedgehog in a Santa Hat Ornament häkeln

Mittel · 9 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 13 Teile in Runden: Head-body ball, Cream face, Snout, Nose, Ear ×2, Cheek ×2, Foot ×2, Santa hat, Pompom, Hanging loop (insgesamt 67 Runden).
  2. Fülle und montiere in 10 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 13 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Igel →Alles in tiere →
  • Vorschau von Winnie-the-Pooh with a Honey Pot
    Generator
    HäkelnRemix

    Winnie-the-Pooh with a Honey Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 64 Runden fertig

  1. Size before assembly: about 5.4 cm at the widest, 5.4 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 4.2 × 2.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 7.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.2 cm at the widest, 0.9 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.8 cm at the widest, 1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.7 cm at the widest, 0.9 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 1.4 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 17 mm across.<!-- (dish 50 %) -->

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 3 cm at the widest, 2.2 cm long; 10 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R7).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 30° around round 5<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 5, on the centre back line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.4 cm at the widest, 1.7 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the cream face) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 4.4 mm wide and 5.2 mm tall, horizontal stitches; centred between rounds 2 and 3, 3 st from the centre top line, toward the toy's left .
  • Eye glint (on the cream face) (2, symmetric: the toy's left side is described, the right is its mirror image): in snow white thread over the embroidered eye, a oval about 1.8 mm wide and 1.8 mm tall, horizontal stitches; centred between rounds 2 and 3, 3 st from the centre top line, toward the toy's left , then moved 0.8 mm to the right and 1.3 mm up (looking at the toy's face).
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 9 and 10, 11 st from the centre front line, toward the toy's left -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy's left -> between rounds 9 and 10, on the centre back line -> between rounds 9 and 10, 4.5 st from the centre back line, toward the toy's right -> between rounds 9 and 10, 11 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • Mane (on the head-body ball): cut 14 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 11 and 12, 13 st from the centre front line, toward the toy's left -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy's left -> between rounds 11 and 12, on the centre back line -> between rounds 11 and 12, 5.5 st from the centre back line, toward the toy's right -> between rounds 11 and 12, 13 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 13 and 14, 14.5 st from the centre front line, toward the toy's left -> between rounds 13 and 14, 6 st from the centre back line, toward the toy's left -> between rounds 13 and 14, on the centre back line -> between rounds 13 and 14, 6 st from the centre back line, toward the toy's right -> between rounds 13 and 14, 14.5 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • (on the head-body ball): cut 12 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 15 and 16, 14.5 st from the centre front line, toward the toy's left -> between rounds 15 and 16, 6 st from the centre back line, toward the toy's left -> between rounds 15 and 16, on the centre back line -> between rounds 15 and 16, 6 st from the centre back line, toward the toy's right -> between rounds 15 and 16, 14.5 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tigger the Bouncy Tiger
    Generator
    HäkelnRemix

    Tigger the Bouncy Tiger

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Speedy Blue Hedgehog
    Generator
    HäkelnRemix

    Speedy Blue Hedgehog

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von White Beagle with Black Ears
    Generator
    HäkelnRemix

    White Beagle with Black Ears

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Grey Tabby Loaf Cat
    Generator
    HäkelnRemix

    Grey Tabby Loaf Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Confused Yellow Duck
    Generator
    HäkelnRemix

    Confused Yellow Duck

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pudding Puppy in a Beret
    Generator
    HäkelnRemix

    Pudding Puppy in a Beret

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Electric Yellow Mouse
    Generator
    HäkelnRemix

    Electric Yellow Mouse

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Piglet in a Green Jumper
    Generator
    HäkelnRemix

    Piglet in a Green Jumper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Peter Rabbit in a Blue Jacket
    Generator
    HäkelnRemix

    Peter Rabbit in a Blue Jacket

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Bunny in a Pink Hood
    Generator
    HäkelnRemix

    Bunny in a Pink Hood

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Simple White Bunny in a Dress
    Generator
    HäkelnRemix

    Simple White Bunny in a Dress

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Mane
  • Mane (on the head-body ball): cut 14 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 17 and 18, 13 st from the centre front line, toward the toy's left -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy's left -> between rounds 17 and 18, on the centre back line -> between rounds 17 and 18, 5.5 st from the centre back line, toward the toy's right -> between rounds 17 and 18, 13 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • Mane (on the head-body ball): cut 10 pieces of yarn (hazel brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 19 and 20, 11 st from the centre front line, toward the toy's left -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy's left -> between rounds 19 and 20, on the centre back line -> between rounds 19 and 20, 4.5 st from the centre back line, toward the toy's right -> between rounds 19 and 20, 11 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • Mane (on the head-body ball): cut 12 pieces of yarn (dark brown, hazel brown) about 34 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 21, 9.5 st from the centre front line, toward the toy's left -> in round 21, 4 st from the centre back line, toward the toy's left -> in round 21, on the centre back line -> in round 21, 4 st from the centre back line, toward the toy's right -> in round 21, 9.5 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 7 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 14 and 15, 11 st from the centre front line, toward the toy's left -> between rounds 15 and 16, 13 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 17 and 18, 10 st from the centre front line, toward the toy's left -> between rounds 18 and 19, 10.5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 6 mm.
  • Fringe (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): cut 3 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 20 and 21, 7.5 st from the centre front line, toward the toy's left -> between rounds 21 and 22, 9 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 6 mm.
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done