amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Pudding Puppy in a Beret Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 89 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
11.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A crochet amigurumi inspired by Pompompurin from Sanrio: a golden puppy with floppy ears and a little brown beret. About 12 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Sanrio.

Pudding Puppy in a Beret häkeln

Mittel · 12 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 11 Teile in Runden: Body, Head, Ear ×2, Beret, Beret stalk, Arm ×2, Leg ×2, Tail (insgesamt 89 Runden).
  2. Fülle und montiere in 8 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixHäkeln

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 71 Runden fertig

  1. Size before assembly: about 7.4 cm at the widest, 4.3 cm long; 16 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.7 cm at the widest, 6.2 cm long; 27 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.3 cm at the widest, 4.8 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 33 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 15<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 15, 0.5 st from the centre bottom line, toward the back <!-- st 0.67 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. Size before assembly: about 5.7 cm at the widest, 1.5 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.5 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 2.1 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 1.7 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the head): between rounds 15 and 16, 8 st apart (count along round 15: about 4 st each side of the centre front line).
  • Satin stitch (on the head): in nose thread, a oval about 6 mm wide and 4.2 mm tall, horizontal stitches; centred in round 17, on the centre front line .
  • Embroidery in mouth thread (on the head), straight stitches through: (in round 18, 1 st from the centre front line, toward the toy's right ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, on the centre front line) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 1 st from the centre front line, toward the toy's left ).
  • Blush about 9 mm, dry pastel or blush (on the head, both sides): between rounds 17 and 18, 6 st from the centre front line, toward the toy's left. Colour blush.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done